Pipe Network Optimisation Using Genetic Algorithms
A new optimization technique of generic algorithms has recently been successfully applied to pipe network optimization. In this paper a parametric analysis is carried out of the genetic...
Non Contact, Remote Sensing of Buried Water Pipeline Leaks Using Infrared Thermography
Subsurface water pipelines, sewer and buried utilities throughout America and the rest of the world range in age from hundreds of years old to brand new. They all have, however, one fact...
A Work Packaging Process Model for Petrochemical Plant Piping Construction
This paper presents a model for the current work packaging process for petrochemical plant piping construction. The basic foundation of the model is formed by identifying major decision...
Stress Analysis in Concrete with Cooling Pipes
A substructure method of finite element analysis is adopted in this paper to simulate heat transfer and thermal stresses in a concrete dam. The massive concrete structure is cooled by...
Resource Constrained Time-Space Scheduling Model
This study aims to develop a resource constrained time-space scheduling model, mainly aiming application to pipeline laying world for gas supply under roads in urban area. This model can...
Invasion of the Zebra Mussels
At first glance, the zebra mussel looked like doom for freshwater users in the Great Lakes: small, hardy, incredibly prolific European mollusks with an affection for freshwater intakes...
Dealing with TMDLs in the Dairy-McKay HUA
The maximum phosphorus concentration for the TMDL in the Tualatin River is set by Oregon Administrative Rules (OAR) at 0.07 mg/1, Dairy-McKay Creek is 0.045 mg/1 Identification of potential...
Development of a Selenium TMDL for the San Joaquin River
The objective of this study is to devise a user-friendly, reliable method to calculate a screening-level 'Total Maximum Daily Load' (TMDL) for the San Joaquin River and similar western...
IRRICAD ? Computerized Irrigation Design
IRRICAD is a software program that helps irrigation designers by using a computerized systems approach to design. The program features drawing CAD input, interpolation of elevation data,...
Velocity Reduction at a Submerged Pipe Outlet
This paper presents the results of a specific model study to reduce the 17.5 m/s (57.3 ft/s) discharge velocity of a submerged circular pipe discharging at floor level into a 30.5 m (100...
Protecting the Boca Raton Outfall Before and After Hurricane Andrew
A critical factor for the success of an ocean outfall is its ability to remain intact and functional for many decades of service, despite extreme episodes of wave attack and beach erosion....
Design and Performance of Emergency Spillway Channel Erosion Protection?Grenada Lake Dam, Grenada, Mississippi
Grenada Lake Dam located on the Yalobusha River in northeast Mississippi is part of the Mississippi River and Tributaries comprehensive plan for flood control. The 13,000-ft-long earthfill-type...
Numerical Solution of Transient Closed-Conduit Flow Equations by the Method of Lines Along Characteristics
The method of characteristics has long been considered as a natural technique for solving transient closed-conduit problems. In this paper, by using the concept of the method of lines,...
Laplace Valve Stroking to Control Water Hammer
The method of Laplace valve stroking to control water hammer is presented. Attention is directed to the most frequently encountered of the simple systems: a single pipe originating at...
Shape Effect on Bed-Load Transport in Pipes
The nature of part-full flows in pipe sewers produces different channel shapes resulting in non-uniform shear stress distribution on the wetted perimeter. New experimental data were utilized...
Regulation of Flow Downstream of Weirs
Reregulation weirs are one means adopted by the Tennessee Valley Authority (TVA) to provide continuous improved minimum flow and wetted area for aquatic life downstream if hydroprojects...
Friction Loss Equations for Hydropower Facilities
Many water suppliers are pursuing economic benefits from water supply and distribution systems through development of hydropower facilities on pipelines. Excessive pressure head that used...
Debris Flow Initiation and Termination in a Gully
A comprehensive simulation model predicting the debris-flow discharge hydrograph, solids concentration in it and the process of variation of the channel due to vertical as well as lateral...
Methods for Prediction of Maximum Scour at Coastal Structures
The most common coast scour-related problems are toe scour at rubble mound structures and vertical seawalls, and scour at the base of piles and horizontal pipelines. Existing scour prediction...
The Connecting Method of Steel and Concrete Using Long Deformed Bar Studs
A new welding technique for long horizontal studs of 19 mm and 22 mm diameters was established. The transmission of shearing and bending forces was evaluated using large model tests. Actual...
Return to search