Geotechnical Aspects of Beach Restoration
Large-scale beach restoration undertaken by the U.S. Army Corps of Engineers in Florida requires millions of cubic yards of beach quality sand. Exploration for these sand resources starts...

Carolina Crossing
The designers of a cable-stayed bridge across the Cooper River in South Carolina incorporated stringent seismic criteria to safeguard against potentially devasting earthquakes....

Use of New Liner In Water Distribution System
For years there has been interest in rehabilitation of water distribution systems to provide quality drinking water and to reduce breaks in the water system service. Much work has been...

Integration of Watershed and Ecological Site Land Classification Scales Using GIS Technology
Advanced analysis of hydrologic processes for use in natural resource simulation models and related applications including rangeland health assessments can be facilitated by the integration...

Better BMP Practices
A study of the professional literature indicates that the meaning of the term BMP, literally signifying a Best Management Practice, has diverged, depending on the professional field. Use...

Finding a Better Cover
An ongoing field test at Sandia National Laboratories, in Albuquerque, New Mexico, compares a basic soil and a compacted clay landfill cover currently prescribed by Environmental Protection...

Making the Most of HPC
Developing high-performance concrete (HPC) was only the first step toward bringing a material with improved durability, strength, constructability, and mechanical properties to the bridge...

Modeling of Inelastic Behavior of RC Structures under Seismic Loads
Proceedings of the U.S.?Japan Seminar on Post-Peak Behavior of Reinforced Concrete Structures Subjected to Seismic Loads: Recent Advances and Challenges on Analysis and Design, held in...

Symptom-Based Reliability of Aging Infrastructure Systems
Ideally, aging infrastructure systems should be monitored for safety and repaired in case of need. Eventually, authors believe that symptom-based reliability will be useful for safety...

Seismic Design of Highway Bridges: Recommended Specifications
Under the AASHTO-sponsored National Cooperative Highway Research Program (NCHRP), a joint venture of the Applied Technology Council and the Multidisciplinary Center for Earthquake Engineering...

Maintenance of Diaphragm-Girder Connections
Fatigue cracking at diaphragm-girder connections and at similar connections of cross-frames and floorbeams have been common in steel highway bridges for the past 20 or 30 years. Fatigue...

A Framework for Performance-Based Seismic Design
The following probabilistic framework for seismic performance assessment is presented as an effective foundation for the development of performance-based guidelines. It suggests a generic...

Effect of Column-to-Beam Strength Ratio on Seismic Performance of RC Moment Frames
Reinforced concrete (RC) moment frames are often used in building applications. During strong earthquake excitations, such buildings have been subject to soft-story or column sidesway...

The Effect of the Slab on Beam-Column Joint Behavior
The three-dimensional effect of slab interaction on frame behavior has been observed in lateral load tests on beam-column-slab elements....

New Concepts in Structural Strength Assessment for Large Buildings in Fire
This paper presents theoretical descriptions of the key phenomena that govern the behaviour of composite framed structures in fire. These descriptions have been developed in parallel with...

High Performance Dampers for Bridges
A multi-disciplinary research study investigates the use of shape memory alloys as seismic dampers in bridges. Shape memory alloys are a class of alloys that display several unique characteristics,...

New Developments in the Field of Seismic Isolation
This paper will concentrate onwhat likely, is the most significant of these issues: changes in the mechanical properties ofseismic isolation and energy dissipation hardware as they are...

Performance of Masonry in Disasters: Lessons Learned and Research Needs Identified
This presentation described in this extended abstract is one of several in a panel discussion entitled Enhanced Research in Masonry. The objectives of the presentation are to discuss the...

Seismic Analysis and Retrofit of the Amoskeag Bridges
In 1983 AASHTO first offered the design guide for seismic analysis of bridges, which ultimately became a permanent part of the AASHTO Bridge Design Manual in 1990. Prior to this time,...

Rehabilitation of the Packers Falls Bridge
The Packers Falls Bridge was constructed in 1912 and consists of a 42' (12.8m) single span, reinforced concrete arch structure. This bridge was constructed using a unique forming system...

 

 

 

 

Return to search