Construction Loads on Floors: Results of a Survey
A survey of post-shorting construction loads on floors of multi-storey buildings is described. The estimated parameters of a probabilistic model of the peak (transient) loads are reported....
A Two-Stage Safety Assessment Methodology for Construction Activities
The control of construction activities requires the evaluation of the condition of the control attributes of interest. In order to develop the required methodology, a model of the construction...
A Multiple Presence Load Model for Bridges
This paper utilises weigh-in-motion data to simulate multi-lane traffic crossing short span multiple-lane bridges. In this manner the reduction factors for a multiple lane bridge are derived....
ASCE Review and Publication Process for Technical Journals
For many, the review and publication process for ASCE technical journals is not clear. Though the basic steps are outlined in the Authors' Guide, there are unwritten practices that may...
What Makes a Quality Paper?
A good paper is one that is easy for members of the intended audience to read and understand. It must contain an informative abstract. The introduction should include information on why...
How to Improve Writing Skills
Many papers submitted to ASCE journals are rejected because of poor writing. Moreover, the most common complaint employers have of newly graduated engineers is their lack of writing skills....
Seven Legal Strategies to Cool Global Warming
The author holds that there are seven types of legal approaches which can be employed by different levels of government to cool global warming. Application of these strategies, singly...
Metrication of Construction?A Message to the American Society of Civil Engineers
The author discusses the reasons for metrication of the U.S. construction industry, describes the Canadian experience in this area, and outlines the necessary steps to alleviate the metrication...
Metrication Between Canada and the USA?A Staged Adoption
Great Britain has led the way for change from English to metric units. There, as in the United States, industry and trade were the motivating forces for change. The gradual change to metric...
High Level Radioactive Waste Management 1992
The proceedings of the third International Conference on High Level Radioactive Waste Mnagement, held on April 12-16, 1992, Las Vegas, Nevada, provides information on the technical and...
Taming Tornado Alley
Some structures�such as nuclear power plants�need complete protection from tornadoes regardless of the high costs of design and construction. Public facilities need protection too, but...
Summary Conclusions & Recommendations of the 1991 Washington State Ports and Transportation Systems
Since 1975, the Washington Public Ports Association and Washington State Department of Transportation (WSDOT) have conducted periodic performance assessments of the state's ports, waterways,...
A Comprehensive Approach to Container Terminal Planning: Striking a Balance
This paper uses the Port of Seattle's recently released Container Terminal Development Plan to present a case-study of a master planning process for continued development of container...
New Cruise Terminal for San Francisco
A new international Cruise Terminal is being developed at Pier 30-32 in San Francisco, to replace present inadequate facilities at Pier 35. The Cruise Terminal will be developed as part...
Design of Marina Replacement Facilities
A majority of the waterfront design projects within the State of California are for the replacement of existing facilities since the densely populated shoreline areas are already heavily...
Proposed Seismic Design Method for Piers and Wharves
Current seismic provisions of the 1991 Uniform Building Code (UBC-91) and the 1983 AASHTO Seismic Design Specifications (AASHTO) are compared as they relate to piers and wharves. An alternate...
Risky Business: Can We Believe Port Risk Assessments?
What is the risk that a maritime incident resulting in catastrophic consequences (environmental damage or loss of life) could occur in a U.S. port or waterway? How does one calculate the...
Container Terminal Gates Flexible Design for a Dynamic Environment
A paper entitled 'Container Terminal Gate Efficiency Hinges on Flexibility' was presented at ASCE Ports '89 by Larry Nye of Cash & Associates Engineers. The paper summarized the...
Draft Chapter 1?Planning and Design Guidelines for Small Craft Harbors?Planning and Environmental Considerations
The purpose of this paper is to present, in draft form, the first chapter of a technical report on the planning and design of small craft harbors being prepared by a special task force...
Planning and Design Guidelines for Small Craft Harbors?Economic factors and Finance
The purpose of this paper is to present, in draft form, the fourth chapter of a technical report on the planning and design of small craft harbors being prepared by a special task force...
Return to search