Landfill Liner Quality
Landfill liners are being made with new synthetic materials, materials which may be beyond the knowledge of the engineer in charge of the landfill construction project. Engineers need...
A Tale of Two Laboratories
Two unusual research centers are built with the materials that will be studied in them, but the similarities end there. GE Plastics' $10 million Living Environments concept...
OTEC Seawater Pipe Cost Comparisons
Describes a material which can substantially reduce the cost of seawater pipes and two methods for building and deploying such pipes for use in land-based OTEC installations, outfall sewers,...
U.S. Construction Aggregates
Crushed stone and sand and gravel are the two main sources of natural construction aggregates in the United States as well as in the world. At the beginning of the 20th century, the production...
Availability of Portland Cement
A general description of economic, technical, and environmental factors that affect the types of portland cement available is presented. Economic factors have had a major effect on balance...
Large Stone Mixes Make a Comeback
Large stone hot mix asphalt common at the turn of the century, is making a comeback in popularity in hot mix asphalt design. Large stone hot asphalt mixtures are being used as a way to...
Comparative Evaluation of 4-Inch and 6-Inch Diameter Specimens for Testing Large Stone Asphalt Mixes
Modified Marshall equipment and Gyratory Testing Machine (GTM) are now available for compacting and testing 6-inch diameter specimens to accommodate aggregate up to 2-inch maximum size....
Wood Variability Effects in Structural Assessment
Engineers evaluating the load carrying capacities of in-service wood structures commonly determine the strength and stiffness properties of structural wood members by various assessment...
Bond Strength of Epoxy-Coated Reinforcement to Concrete?An Update
The results of a large-scale study to determine the effect of epoxy coating on bond strength is described. The study addresses the effects of coating thickness, deformation pattern, bar...
Influence of Epoxy Coating on Stress Transfer from Steel to Concrete
To assess the influence of epoxy coating on the bond characteristics of reinforcing bars, a series of tests was conducted to determine differences in stress transfer between coated and...
Evaluation of Bond Performance of Epoxy-Coated Reinforcing Steel Using Nonlinear Finite Element Analysis
The role played by epoxy coatings on the failure of standard beam-end specimens is explored. The specimen consists of a reinforcing bar embedded in concrete. As the bar is loaded, the...
Bond Performance of Reinforcing Bars Embedded in Fiber Reinforced Concrete and Subjected to Monotonic and Cyclic Loads
The primary variables investigated were fiber content and loading history. The reinforcing bar size was ASTM #5. Steel fibers with hooked ends were used with four fiber contents, namely;...
A Materials Study of Interleaved Bismaleimide Composites
One approach for improving damage tolerance in epoxy based composites involves interleafing of tough adhesive layers between plies of the composite prior to fabrication. Extension of this...
Long-Term Strength Gain or High Strength Concrete as Monitored by Drilled Cores
An evaluation was made of the relationship between standard cylinders, four-inch by eight-inch cylinders, and drilled cores. The evaluation results showed that the strengths obtained from...
Heat Development and In-Situ Strength of Large Diameter Caissons Made with High-Strength Concrete
The test program essentially consisted of casting two prototype caissons using two different high-strength concretes, measuring internal caisson and adjacent soil temperatures, extracting...
Evaluation of Factors Affecting High-Strength Concrete Cores
A number of factors are discussed to explain different effects they have on core strength. These factors should be considered when evaluating cores tested to determine 'true'...
Compressive Strength Relationship Between Cylinder Tests and Core Tests
A core obtained from any field cured structural member will be inherently different than the field cured cylinder used as a control. Consequently, comparisons with field cured cylinders...
Maturity and Pullout for High-Strength Concrete
As with other types of concrete mixtures, construction with high-strength concrete requires assurance that sufficient levels of in-place strength are reached at specific times. An experimental...
Laboratory Aging of Asphalt-Aggregate Mixtures
Aging may result in hardening (stiffening) of the mixture which will result in a change in performance of the mixture. This may be beneficial since a stiffer mixture will have improved...
Asphalt Age Hardening?Trends and Predictions
Pavement cracking is substantially related to the consistency of asphalt cement binders. The variation in hardness of binders is related primarily to asphalt characteristics, environment...
Return to search