Parameter Study of Stresses in Mass Concrete Using Two Fly Ash Mixtures
Finite-element modeling of the incremental construction procedure for mass concrete structures has been used to study the effects of three mechanical properties on thermal stresses. Material...
70 Year Performance Record for High Strength Structural Lightweight Concrete
The paper briefly discusses the first ship built using expanded aggregates manufactured in a rotary kiln the USS Selma. It then goes on to discuss achieving high strength concrete with...
Field Performance of Fiber Reinforced Concrete Highway Pavements
This paper reports the evaluation of field performance of fiber reinforced concrete pavements. The concrete was designed for a compressive strength of about 40 MPa. Steel fibers with hooked...
Effect of Lime on Asphalt Concrete Pavement Performance
In the early to mid 1980's, the Federal Highway Administration constructed 15 experimental field test sections in four states designed to investigate mitigating moisture damage...
Experimental Mixes to Minimize Rutting
This report describes the materials and construction details involved in the design and placement of four experimental mixes on I-95 (Richmond-Petersburg Turnpike) in 1985 and follows...
Concrete Pavement?Specification by Modeling
Concrete pavement specifications have traditionally been prescriptive with construction in-put defined. This practice does not include a definition of the product intended, restricts innovation,...
Curing Time for CRCP Mixtures Based on Flexural Strength
In this paper, the effect of different curing conditions on the flexural strength is investigated, and also the minimum required period for moist curing is found. The combined effect of...
Brittleness Index of Cementitious Composites
Series of direct tension tests were conducted to observe the softening response of different types of cementitious composites, namely, mortar, plain concrete, high strength concrete, normal...
Brittleness of High Strength Concrete
Fracture mechanics approaches are needed to determine material parameters which are related to the brittleness of concrete and its structural response. The size effect method is used to...
Concepts for Hybrid FRP Bridge Deck Systems
This paper presents selected structural concepts for modular bridge deck systems taking into account the limitations imposed by fabrication processes for polymer matrix composites. An...
Durability of High-Strength Concrete Containing Fly-Ash and Silica Fume
The durability of high-strength concrete made with local materials were tested with regard to the freezing and thawing resistance of concrete in accordance with ASTM C666 procedure A....
High Early Strength Concrete Containing Large Quantities of Fly Ash
This paper presents results of research performed at a precast/prestressed concrete plant to identify optimum mix proportions for production of high early strength concrete with high fly...
Properties of Flyash Cellular Concrete
A research program was conducted with the aim of studying the physical and flexural properties of cellular concrete containing flyash. Two different types of fibers were also added to...
Thermomechanical Damage Due to Hydration in Large Concrete Dams
This paper presents the bases of a thermomechanical model able to describe the main evolution of concrete properties with aging. The model is based on the 'maturity'...
Drying and Shrinkage of Concrete: The Case of Massive Parts
The natural drying of concrete induces a number of intense mechanical effects on the structures. These various effects are of importance to engineers: in the design stage (estimate of...
Effect of Environment on Durability of Pavement Materials: An Overview
The best known causes of material degradation in pavements include environment, traffic loads, and the use of substandard materials. Presented in the paper is a critical review of the...
Environmental Considerations in the Design of Asphalt Concrete Paving Mixtures
The design of asphalt concrete mixtures is largely based on two empirical mixture design methods. These are 'Marshall' and 'Hveem',...
Environmental Degradation of Concrete Pore Structure
This paper illustrates how Conductometric Phase Transition Porosimetry can be used to monitor changes in the pore structure of Portland Cement Concrete which result from repeated freezing...
Size Effect in Concrete Structures and Influence of Loading Rate
The size effect law models the influence of the dimensions of the structure or specimen on the failure stress. This model can be used to quantify the brittleness of failure, and determine...
Bond Stress-Slip Relationships of FRP Rebars in Concrete
A newly developed type of reinforcement bar for concrete, Fiberglass Reinforced Plastic (FRP) rebar, can be used advantageously in concrete exposed to marine or corrosive environments....
Return to search