ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Stochastic Seismic Response of Simple Structures
Since, at present, it is impossible to eliminate the various sources of uncertainty related to earthquake loading, it is necessary to better understand their effects on structural seismic...

Dynanmic Stability and Seismic Response of Damped Beams in the Presence of Follower Forces
The dynamic stability and the seismic response of general beams are examined, by discretizing the structure to a set of rigid bars, linked together by means of elastic constraints (Cells...

Effects on Seismic Spatial Variations to Suspension Bridge Responses
The dynamic soil-structure interaction effects and spatial variations of a seismic motion seem to have significant contributions on the response evaluation of a long span suspension bridge....

Comparative Time Domain Analysis of Some Available Analytical and Empirical Expressions for the Spatial Variability of Seismic Ground Motions
Simulations in space and time based on models for the spatial variability of seismic ground motions are generated. Displacement time histories are simulated through the spectral representation...

Methodology for Developing an Engineering Solution for Web Crippling
This paper describes the methodology used to develop an engineering solution for web crippling of aluminum trapezoidal sections. The development has two steps. The functional form for...

Interlaminar Fracture Toughness Test: Traditional and Modified
For brittle, transversely isotropic, composite materials we have developed an alternative Mode II interlaminar fracture toughness test (G_IIc) that...

Finite Element Analysis and Testing of a Laminated Composite Fuselage Test Structure
A test structure modeling a full scale section of a composite aircraft fuselage was designed, analyzed, fabricated, and pressure tested. The test structure consisted of a cylindrical graphite...

Failure Modes and Toughening Mechanisms in CMC
The paper reports results from stable flexural and tension tests conducted at room temperature on plain matrix and ceramic matrix composite (CMC) specimens. The flexural tests were conducted...

Acoustic Emission Source Locations in Concrete
The location of acoustic emission (AE) sources can potentially provide information on the fracture process zone in brittle materials such as concrete. Typical AE experiments generate very...

Material Testing at High Pressure
A static test cell has been designed and fabricated to apply a peak stress of up to 2 GPa to a 2.54 cm cylindrical specimen. The cell design was based on the 'belt'...

Strain Rate Effects on Pressuremeter Testing
This paper discusses the effect of strain rate on the cavity expansion problem and pressuremeter test. A cuboidal shear device, CSD, was used to perform pressuremeter strain path tests...

Penetration Tests in a Particulate Calibration Chamber
A numerical technique which couples discrete element method with boundary element method has been developed to simulate a two dimensional particulate assembly. Soil particles in the near...

Comparison of a Microscopic Model and a Macroscopic Model Predictions on the Stress-Strain Behavior of a Soil
The stress-strain behavior of a soil under drained triaxial conditions was simulated using the Microscopic constitutive model TRUBAL. The model parameters for the Macroscopic constitutive...

A Time-Dependent Microplane Model for Creep of Cohesive Soils
The microplane model is used in this paper to describe the time-dependent (creep) behavior of cohesive soils (clays). The constitutive equations are defined on each of a set of microplanes...

Testing the Limits
More than 100,000 bridges in the U.S. are considered structurally deficient and in need of posted load limits or repair. As the number continues to mount, engineers search for a better...

Inspection Goes High Tech
Many believe that rehabilitation of the existing infrastructure�not net construction�will dominate the 1990s. Therefore, accurate condition assessment is crucial, since public works agencies...

Statistical Evaluation of CPT and DMT Measurements at the Heber Road Site
A series of field tests were conducted at several sites in the Imperial Valley, South California from 1983 to 1985. The field testing program included cone penetration, dilatometer, standard...

The Pressuremeter: Some Special Applications
The preboring pressuremeter has been used for foundation design for many years. Some recent developments are presented which extend the applications of the pressuremeter. These developments...

Scale Effects in Cone Penetration Tests
A field testing program was undertaken to examine the existence of scale effects between a miniature 1.27 cm² and 15 cm²...

Plate Load and Pressuremeter Testing in Saprolite
On the island of Oahu, Hawaii, an exploratory tunnel for the Interstate Route H-3 highway was completed in December 1989. The purpose of the exploratory tunnel was two-fold; first to locate...

 

 

 

 

Return to search