Surface Treatments for Concrete
The US Army Corps of Engineers initiated in 1984 a research program designated Repair, Evaluation, Maintenance, and Rehabilitation (REMR), one of the work units being the evaluation of...
The Use of Penetrating Sealers on Concrete Bridge Decks
Acceptance criteria for Penetrating sealers is shown. Penetrating sealers can be used as cost effective preventive maintenance for bridge deck concrete in northern climates. Factors affecting...
Evaluation and Remediation of Construction Defects in Tilt Wall Panels
Both the surface appearance and structural safety were of concern to the Owner of a five year old warehouse structure that was experiencing delamination of tilt-up wall panels. Delamination...
High Molecular Weight Methacrylate for Sealing Cracked Concrete
The sealing of cracks in concrete surfaces has been one of the most difficult types of repair to accomplish. Epoxy injection has been widely used, but due to its relatively high cost,...
Concrete Residential Construction in Baja, Mexico
Mexicali, Mexico has experienced earthquakes of magnitude 6.0 to 7.6 on the Richter Scale. A popular and readily available residential construction material is reinforced concrete comprised...
Fatigue of Reinforcement in Partially Prestressed Beams
A summary of the findings of an extensive experimental program on the fatigue characteristics of partially prestressed concrete beams is described. It is observed that the stress range...
A Summary and Review of Fatigue Data for Mechanical and Welded Splices in Reinforcing Bars
Published reports pertaining to fatigue tests of welded and mechanical splices in reinforcing bars were reviewed. It was observed that most specimens fractured in the reinforcing bar adjacent...
Fatigue Strength of Welded Steel Mesh
Welded steel mesh (WSM) is prefabricated by welding cold-drawn wires in a grid-like mesh. Engineers avoid using WSM as main reinforcement in highway structures due to their lack of knowledge...
Concrete Strength-Quality Assurance
The usual criterion for establishing grades of structural concrete is the compressive strength measured in an arbitrary manner on a standardized specimen stored in a stipulated fashion...
Early Age Strength Detection for In-situ Concrete
In recent years it has become increasingly beneficial to know the quality of concrete as soon as possible after it has been placed. This is especially true for high-rise concrete buildings...
Fast-Track Concrete Paving
Well known for its corn production, the State of Iowa has been seeding a new product for the past several years. 'Fast Track' concrete has grown along the edge...
Early Opening of Concrete Pavements to Traffic
Current practice for opening slab replacements and full-depth repairs to traffic ranges widely from 2 hours to several days. A rational and simple procedure is urgently needed for determining...
Lessons Learned in Laboratory and Field Evaluation of Accelerated Strength Tests for Quality Control of Concrete Pavements
This paper describes the results of an accelerated strength testing program performed to evaluate flexural strength potential at 28- and 90-days. Based upon a literature review of previous...
Application of Fiber-Composites in Civil Engineering
Two potential applications of Glass-Fiber-Reinforced-Plastics (GFRP) in civil engineering type structures are investigated: (1) GFRP rebars in concrete beams; (2) strengthening of concrete...
Compressive Deterioration of Cracked Concrete
When shear behavior of reinforced concrete (R/C) members is to be simulated, the compressive strength and the stiffness reduction of cracked concrete must be taken into consideration....
Behavior of a Crack Under Reversed Cyclic Loading
The results of two series of basic experimental studies for opening and closing behavior in RC members are reported. For the first series, axial forces were applied to the specimens in...
Ultimate Strength and Deformation of RC Panels
In this study, twenty reinforced concrete panels have been tested under pure shear. Test results showed that the compressive strength of concrete strut was strongly affected by bond characteristics...
Analytical Model for RC Panels Under Cyclic Load
There are several existing constitutive laws for cracked concrete and steel in RC developed in Okamura laboratory. These models have been developed and verified through reversed uniaxial...
Development of Analytical Models for Reinforced Concrete
A computer program called WCOMR was developed to analyze the characteristics of RC walls subjected to reversed cyclic loading. The WCOMR comprises RC element idealization described by...
Concrete Bridges � State-of-the-Art
The paper reviews the types of concrete bridge decks in most common use today, with particular emphasis on recent developments. Current trends in substructures and foundations are also...
Return to search