Evaluation of Partial Depth Spall Repair Materials and Procedures
In 1990, as a part of a Strategic Highway Research Program project (SHRP H-106, Innovative Materials Development and Testing), an investigation was initiated to evaluate the performance...
The Crown and the Curtain Wall
Crowning the complex curtainwall of an 870 ft concrete tower with a 150 ft high crown of aluminum masts in concentric rings above the 60th floor required ingenuity and extraordinary cooperation...
Migration of Spilled Oil from Ruptured Underground Crude Oil Pipelines in the Memphis Area
This study evaluated the impact of an oil pipeline rupture in the recharge area of a West Tennessee aquifer. Two potential break locations were chosen in the alluvial valley of a main...
An Assessment of Environmental Costs Associated with Crude Oil Pipeline Damage Caused by Earthquakes
This paper presents a methodology for assessing the risk of environmental contamination from oil pipeline leaks caused by earthquakes. Risk is measured both as volume of oil released and...
Hydraulic Engineering
Saving a Threatened Resource?In Search of Solutions
This proceedings,
Risk-Based Decision Making in Water Resources V
This proceedings,
Dallas Goes Trenchless
Dallas Water Utilities (DWU) has stopped relying solely on traditional open-cut trenching methods. Instead, we look to trenchless technologies to minimize costs and disruption to the public....
Overlays on Deck
By the summer of 1993, a standard specification may be on the books for polymer concrete bridge-deck overlays�a high-tech rehab technique requiring a combination of plastic binder�such...
Materials
Performance and Prevention of Deficiencies and Failures
This proceedings,
Predicting Fate and Effects of Hydrocarbons in the Oceans
Three major sources of hydrocarbons exist in the oceans. One is from oil spills related to the production and transportation of hydrocarbons. The second, while generally not spectacular,...
Corrosion Fatigue of Deepwater Offshore Materials
Evaluation of the fatigue life of offshore structures operating in depths of up to 10,000 feet (3,048 m) requires knowledge of the combined effect of axial and hydrostatic loading on the...
Effects of Freezing on Impact Properties of RTM Composites, and Their Applications in Offshore Structures
Resin transfer molding is rapidly being acknowledged as the process with potential to create perhaps the purest form of a composite material as representative of the concept of `material-by-design.'...
Fiber Ropes for Ocean Engineering in the 21st Century
Recent advances in synthetic fiber ropes will greatly influence the practice of civil engineering in the oceans during the 21st Century. New fibers have moduli almost as high as steel...
Composites for Offshore Applications: A Multidisciplinary Education Program for the Marine Industry
Composites are increasingly being considered for offshore and other marine structural applications. Polymeric matrix composites reinforced with glass, carbon, and aramids offer substantial...
Use of X-Ray Computed Tomography in the Study of Marine Sediments
X-ray computed tomography (CT scanning) is primarily a medical imaging technique. When applied to marine sediments, it responds predominately to the spatial density distribution within...
Utilization of Waste Materials in Civil Engineering Construction
Industrial growth has increased the volume of wastes generated from energy production, mining, industrial processes and civil works. For economic and related reasons, the use of waste...
Put to the Test
In the construction industry, the concept of life-cycle cost applies not only to the infrastructure itself, but to the materials that go in to building that infrastructure. To improve...
Pressure Pipeline Design for Water and Wastewater
This committee report,
Cellular Sheet-Pile Floodwall
Williamson, W. Va., flooded 37 times in this century, will soon be guarded by a $41 million, 4000 ft floodwall being built by the U.S. Army Corps of Engineers. A series of 41 circular...
Laboratory Methods for Preparing Low-Density Frozen Saline Soil Samples
Laboratory methods were developed for preparing low-density frozen saline soil samples with density values ranging from 85-110 lb/ft3. This range...
Return to search