Building Code Requirements for Masonry Structures (ACI 530-95/ ASCE 5-95/TMS 402-95); Specification for Masonry Structures (ACI 530.1-95/ ASCE 6-95/TMS 602-95); Commentary on Building Code Requirements for Masonry Structures (ACI 530-95/ ASCE 5-95/TMS 402-95); Commentary on Specification for Masonry Structures (ACI 530.1-95/ ASCE 6-95/TMS 602-95)
Copublished with American Concrete Institute (ACI) and The Masonry Society (TMS)
Action Plan
An Enhanced Building Technology Evaluation Process
Prepared by the Partnership for Building Innovation of CERF. Sponsored by CERF; National Institute of Standards and Technology; U.S. Department of Housing and Urban Development; U.S. Department...
Blast Wall Bravura
Since the 1988 disaster on the Piper Alpha platform in the North Sea, which claimed 165 lives, legislation in the United Kingdom has required the operators of offshore installations to...
Starting a Project
Project start-up marks the end of the planning activities and the beginning of the project. The PM must take the steps necessary to set up job numbers, job data sheets, assemble data needed...
The Northridge Fractures: Are We Learning the Right Lessons?
After the Northridge earthquake in January 1994, engineers found problems with special moment-resisting frames. There were multiple facture modes, and typical damage involved primary crack...
A Safer Earthquake Design Code After NorthRidge
Three recent killer California earthquakes have demonstrated serious deficiencies in our current building codes. As they do after all such events, officials in California and other states...
Gaining Project Acceptance
Involvng every constituency early in the development of public works projects can build acceptance even when parties don't get exactly what they want. Two Illinois transportation...
Lessons from Nonfailures
Two case histories are described in which building owners were told during rehabilitation projects that their structures were in serious trouble. In one case, the engineer told the owner...
The Winds of Change?
In 1992, Hurricanes Andrew and Iniki combined to generate an estimated $30 billion in damage. The storms also generated their share of reports and recommendations about how best to mitigate...
Integrated Spacecraft Environments Model (ISEM)
Capabilities of the ISEM code are presented that can aid in the understanding of the complex interactions between a space system and the ambient environment. The development of ISEM has...
Remote Sensing of AstrofuelTM
A direct, high-resolution measurement from lunar orbit of the location of high concentrations of 3He in the lunar regolith is needed for the initiation...
Understanding ISO
Many U.S. consulting firms are being registered under the International Organization for Standardization (ISO) 9000 series, which set standards for business conduct to achieve quality....
Representation and Processing of Design Standards: a Bifurcation between Research and Practice
There have been attempts to develop representations of design standards and procedures for computing representations of the design standard on which computations are based. However, within...
Qualification System for Building Engineers in Japan
Recently, it has become common for structural engineers to provide consulting services beyond their countries. Thus it is important that they become fully acquainted with the working conditions...
Lateral Buckling: A Comparison of AISC-LRFD and Eurocode 3
The nominal moment capacity of laterally unsupported, doubly-symmetric, steel I-beams are computed and compared using the AISC-LRFD and EC 3 design recommendations. A review of the EC...
Proposed Hurricane Wind Speeds for ASCE 7-95
A 2-3 second peak gust wind map has been proposed for the wind load provisions of ASCE 7-95, now in draft form. On the hurricane coast, speeds from published Monte Carlo analyses were...
Hurricane Windspeeds at Inland Locations
A critical review of the windfield and filling models used in the hurricane simulation procedure of Batts et al. [1980] clearly indicates that the hurricane windspeeds they obtained for...
Harmonization of Reliability-Based Timber Engineering Codes and Standards
An overview of activities related to harmonization of reliability-based timber design codes and standards is presented. The overview is based on information generated through a NATO Advanced...
The Canadian Approach in the Design of Wood Structures: Conversion to Limit States Design
During the early 70's, the National Building Code of Canada (NBCC) established the principle that structural design be carried out using the limit states design (LSD) method. The technical...
Load and Resistance Factors for Bridge Design Code
The paper summarizes the code development procedures used for the new LRFD (load and resistance factor design) bridge code. The current specifications use allowable stresses and/or load...
Return to search