Trace Toxic Metals Emissions from Hazardous Waste Incinerators
A physical model is proposed in order to explain the vaporization of metals during metallic waste incineration and is based on work performed to investigate inorganic emissions from coal...

Leaching Characteristics of Metal Finishing Sludges
The purpose of this research was to study the feasibility of biodegrading phenolics to methane by thermophilic anaerobic treatment. The study was a feasibility level assessment which examined...

Future Hydrothermal Power of the United States
Public indignation toward nuclear-power expansion, and dwindling oil and gas reserves dictate the needs to look for alternative-power sources, such as coal and water. It is a prime time...

Behavior of Sediment-Laden Plumes on Steep Slopes
The near field behavior of dense, sediment-laden flows on steep slopes was investigated as part of a study of mine tailings disposal. A literature review indicated that field and laboratory...

An Annual Water Balance for a Surface Mining Overburden Waste Embankment
The embankment contained a volume of 257 thousand cubic yards and resulted from a phosphate surface mining operation in southeastern Idaho. The elevation of the embankment is about 7500...

Water Balance Approach to Prediction of Seepage from Mine Tailings Impoundments, Part I: General Water Balance Approach
The prediction of seepage from a tailings impoundment requires careful evaluation because the predictions can have significant economic impact upon designs, as well as permit stipulations...

Water Balance Approach to Prediction of Seepage From Mine Tailings Impoundments, Part II: Theoretical Aspects of Water Balance Approach to Seepage Modeling and Detailed Case History Results
Some of the most significant volumes and rates of interstitial tailings water discharge generally occurs during the initial portions of the primary consolidation process. During primary...

Some Aspects of Analysis and Prediction of Subsidence
A procedure based on the nonlinear finite element analysis was investigated for the prediction of subsidence caused by longwall mining. This paper presents a case study involving predictions...

Computer Modeling of Roof Support
The Bureau of Mines is using a full-scale geotechnical model of a 15-foot-wide (4. 6-m) coal mine entry in correlation with computer finite-element analysis at its Spokane Research Center...

Impoundment Design for Precious Metal Tailings
An engineering study and design of impoundments for the disposal of mill tailings in central Nevada is presented. Mill process waste is generated as flotation tailings and cyanide residue....

Ground-Water Drainage to Surface Mines Refined
Changes in seepage flux and hydraulic head (ground-water level) resulting from ground-water drainage into the first and subsequent cuts of a surface coal mine can be estimated by a technique...

Lessons Learned from First Impulse Turbine Installation in the U.S. Mining Industry
The paper discusses a research study to recover energy from service or cooling water brought into deep mines. The test site was the Luck Friday Mine, owned and operated by the Hecla Mining...

Refuse Recycling
The refuse recycling plant at Columbus, Ohio, is a pioneer in burning as fuel a combination of refuse and coal. This hybrid fuel has advantages over burning either alone. One winter in...

The Theory of One-Dimensional Consolidation of Saturated Clays
The theory of nonlinear finite strain consolidation is reviewed. A modification of the effective stress equation to account of settling and consolidation as a unified phenomenon is proposed....

Particle Interaction and Stability of Suspended Solids
The physics of particle interaction, which is responsible for the problem of the apparent tardy settling of suspended solids in tailings discharge slurries containing initially low concentrations...

Validation of Consolidation Properties of Phosphatic Clay at Very High Void Ratios
The void ratio-effective stress and void ratio permeability relationships for phosphate slime mine tailings were measured by several methods. The measurements were used in nonlinear finite...

Consolidation of Mining Wastes
This paper describes laboratory and field tests for determining consolidation properties of soft sediments, presents data on several types of mining wastes, and presents the results of...

Prediction of Viable Tailings Disposal Methods
A sand-fines-water diagram is proposed to analyze and describe slurries composed of coarse and fine particulate matter. The diagram can be used to predict and plan disposal methods for...

Waste Phosphatic Clay Disposal in Mine Cutsr
Research was undertaken to assess the applicability of waste clay disposal back into phosphate mine cuts. The pit was monitored for two years with measurements of clay surface elevation,...

Application of Finite Strain Consolidation Theory for Engineering Design and Environmental Planning of Mine Tailings Impoundments
A knowledge of the consolidation behavior of mine tailings, during and after deposition, is important in estimating final impoundment capacity, rate and pore fluid expulsion during and...

 

 

 

 

Return to search