Hydrodynamic Pressure on an Oscillating Vertical Plate
The hydrodynamic pressure on an oscillating vertical plate could be influenced by the effects of compressibility of fluids and surface waves. The compressibility is effective for higher...
Biomechanical Model of a Lumbar Intervertebral Joint?A System Approach
This study was conducted to determine the forces sustained by the lumbar ligaments under flexion-compression using a two-dimensional equilibrium model. The lumbar motion segment was modeled...
Buckling Loads of Columns Made of Viscoelastic Materials
This is about the developing of relationships for predicting the change of buckling loads of columns made of viscoelastic materials under different loads. When a columnlike structural...
A Second Order Analysis Technique for Nonprismatic Bridge Piers
An approximate second order method is presented for the analysis and design of cantilever compression members. Prismatic members with nonconstant reinforcement, and nonprismatic members...
Postbuckling Analysis of Composite Stiffeners under Uniaxial Compression
This paper presents an analytical and experimental study conducted for postbuckling of I-section stiffeners. A stability analysis was carried out to determine postbuckling response of...
Volume-Controlled Approach for Direct Measurements of Compressibility and Hydraulic Conductivity
Foundation Investigations of Concrete Dams
This paper discusses a series of foundation investigations conducted on concrete dams by Pacific Gas and Electric Company. The paper focuses on investigative techniques, equipment, appropriate...
History of Lysimeter Design and Effects of Environmental Disturbances
A brief history of developments in lysimeter design is indicated. Disturbances introduced by the measurement system on the surrounding environment are discussed. The use of weighing lysimeters...
Concrete Mixture Evaluation and Acceptance for Air Field Pavements
Evaluation of the strength of portland cement concrete using flexural strength and compressive strength tests is examined. Problems with the use of flexural testing in the field are discussed...
Reliability of Steel Columns Subjected to Buckling?Comparison of International Standard Codes of Design
Standard codes of design represent the phenomenon of buckling by means of a curve taking into account random structural imperfections. The author suggests a probabilistic method to evaluate...
Concepts in Prototype Testing for In Situ Geomechanical Investigations at Yucca Mountain
Geomechanical investigations comprise a significant portion of the site characterization program to be conducted at Yucca Mountain, the site of a proposed repository for nuclear waste....
Modeling of Batch Thickening of Activated Sludge
Application of Weakly Compressible Flow Method to 2-D Open Channel Flows
The depth averaged equations for open channel flows are shown to be similar to that of the weakly compressible flows. The finite volume scheme developed for weakly compressible flows has...
Long-Term Strength Gain or High Strength Concrete as Monitored by Drilled Cores
An evaluation was made of the relationship between standard cylinders, four-inch by eight-inch cylinders, and drilled cores. The evaluation results showed that the strengths obtained from...
Evaluation of Factors Affecting High-Strength Concrete Cores
A number of factors are discussed to explain different effects they have on core strength. These factors should be considered when evaluating cores tested to determine 'true'...
Compressive Strength Relationship Between Cylinder Tests and Core Tests
A core obtained from any field cured structural member will be inherently different than the field cured cylinder used as a control. Consequently, comparisons with field cured cylinders...
Maturity and Pullout for High-Strength Concrete
As with other types of concrete mixtures, construction with high-strength concrete requires assurance that sufficient levels of in-place strength are reached at specific times. An experimental...
Combined Compression-Shear Experiments on Mortar-Aggregate Interfaces
Material interfaces between matrix and aggregate particles in cementitious composites such as concrete are considered to be a very important component of the material microstructure, which...
Design of a Lined Landfill on Compressible Clays
In mid-August, 1989, a 500,000m3 landslide occurred at a commercially operated landfill in central Maine. The landslide material consisted of municipal...
Durability of Fly Ash Concrete in the Marine Environment
This paper presents the experimental investigation of durability of air-entrained fly ash concrete in the marine environment. The findings indicate that the deterioration rate of durability...
Return to search