On the Elasto-Plastic Behavior of an Unsaturated Silt
Due to technical difficulties related to the control and measurement of the suction in unsaturated soils, few experimental data on the mechanical behavior of those soils exits. The paper...
Ctitical Evaluation of Thickening Theories
High Strength, Low Permeability Garage Rehab Concrete
Physical and engineering properties of high strength structural lightweight concrete used to replace deteriorated concrete in garage structure rehabilitation programs are reported. Structurally...
Bond Strength of Straight GFRP Rebars
An overview of a study on bond of straight Glass-fiber-reinforced-plastic (GFRP) rebars to concrete is presented. The 54 specimens to be tested include several variables, such as the mode...
Performance of Crushed Waste Concrete as Aggregate in Structural Concrete
Methods to Estimate Composition of Jet Grout Bodies
Effects of Mixing on Rheological Properties of Microfine Cement Grout
Anisotropic Behavior of Cement-Grouted Sand
Ultrafine Cement Tests and Dam Test Grouting
Chemical Based Cement Grout System for Rock Grouting
Microfine Cement/Sodium Silicate Grout
Mechanical Properties of Microfine Cement/Sodium Silicate Grouted Sand
Bonding Strength of Grouts and Behavior of Silicate Grouted Sand
Engineering Properties of Acrylate Polymer Grout
Plastic Waste for Low-Weight Embankments
Evaluation of Compressive Strength for High-Strength Concrete by Pulse Velocity Method
Development of compressive strength and pulse velocity for high-strength concrete from the age of 5 hours are studied in relation to cementitious material types and curing conditions....
Compression Planning for Continuous Improvement in Quality Programs
Quantitative Stereology of Concrete Microcracking
Stereological methods enable extrapolation of quantitative microcrack characterization from two dimensions to three dimensional space. However, because these quantifying techniques are...
Constitutive Modeling and Simulation of Energy Absorbing Polyurethane Foam Under Impact Loading
The compressive-stress strain response of polyurethane foam under uniaxial compressive impact loading has been studied. The development of a uniaxial constitutive model from strain rate...
Automated Identification of Compression-Induced Cracking in Cement Paste
The development of image analysis techniques to identify cracks using scanning electron microscope images of hydrated cement paste is described. Cracks are identified based on both the...
Return to search