Prescriptive Design Method (PrDM)
This chapter discusses the prescriptive design method (PrDM). Topics include classification according to current provisions; system analysis; vertical redistribution of coupling beam forces;...

Component Design
This chapter discusses component design. Topics include coupling beam design; beam-wall connection design; and wall pier design....

Alternative Hybrid Wall Systems
This chapter discusses alternative hybrid wall systems. Topics include unbonded post-tensioned coupled wall systems; steel coupling beam with fuse; and composite shear plate coupling beam....

Size and Scale Effects on the Shear Strength of Concrete Beams
This paper identifies and discusses the role of proper geometric scale of relevant parameters in the size effect in shear, particularly in terms of practical beam design. In the overall...

Building Code Requirements and Specification for Masonry Structures
Containing Building Code Requirements for Masonry Structures (TMS 402-08/ACI 530-08/ASCE 5-08, Specification for Masonry Structures (TMS 602-08/ACI 530.1-08/ASCE 6-08) and Companion Committees
The Code covers the design and construction of masonry structrures while the Specification is concerned with the minimum construction requirements for masonry in structures. Some of the...

Reinforced Concrete Beam: Introduction
This chapter introduces the subject of reinforced concrete beams....

Reinforced Concrete Beam
This chapter discusses the tabulation of reinforced concrete beams data in Microsoft Excel....

Reinforced Concrete Beam
This chapter discusses the tabulation of reinforced concrete beam data in Microsoft Excel....

New Shear Stud Provisions for Composite Beam Design
The 2005 American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 2005) will contain significant changes to the shear connector provisions for...

Overview of Structural Behavior of Members Subjected to Torsion
The torsion strength of concrete beams depends on many factors, such as the amount of reinforcement, the volumetric ratios of longitudinal and transverse steel bars, the concrete strength,...

Advances in Analytical Modeling of Torsional Members
The basic formula for calculating the torsional strength of reinforced concrete members was developed by Rausch (1929) using the space truss concept. Unfortunately, Rausch's equation may...

Members Subjected to Torsion Combined with Other Actions
The combination of torsion with bending and shear (T-M-V) in members with both transverse and longitudinal reinforcement is the most commonly encountered combination in practical cases....

Evaluation of the Geo-Con Vert Wall System
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF/IIEC Innovation Center This report describes a HITEC evaluation designed...

Applications of Multibeam Echo Sounding with Topographic Mapping for Monitoring of Rubble Mound Breakwaters
Analysis of data from the breakwater monitoring program indicates the integration of multibeam survey capability with the increased accuracy of OTF DGPS positioning and advanced data management...

Application of Multibeam Echo Sounding and Side Scan Sonar for Mapping of Shoreline Protection Revetments
The use of multibeam survey methodology coupled with high precision positioning systems for the mapping of shoreline protection features and the adjacent offshore areas allows development...

Bell's Bridge Rehabilitation
Bell's Bridge carries Tidewater Drive, a major urban arterial in the City of Norfolk, Virginia, over Wayne Creek, a tributary of the Lafayette River. During a routine inspection in 1995,...

The Effect of the Slab on Beam-Column Joint Behavior
The three-dimensional effect of slab interaction on frame behavior has been observed in lateral load tests on beam-column-slab elements....

Evolution of Composite Floor Systems in the United States
Composite floor systems, which combine structural steel beams with a cast-in-place concrete slab, have grown in popularity in the U.S. during the past 40 years. In most early applications,...

Cyclic Behavior of Three-Dimensional Partially-Restrained Composite Connections
This paper describes the test of a full-scale, bi-directional, PR composite beam-to-column connection. The PR connection consisted of continuous reinforcement bars across the column and...

Sharp Curves
In Madison, Mississippi, just north of Jackson on Interstate 55, a diamond interchange with State Route 463 has become a bottleneck for commuters and local motorists. But the typical solution—a...

 

 

 

 

Return to search