Quake Proofing a Palace
A $36.5 million renovation of the California Palace of the Legion of Honor included a two-level underground expansion on a very sensitive site and the largest-ever seismic retrofit for...

New Address for the 21st Century
The purchase of the office building in Reston, Virginia, that will be the society's new headquarters is described. The decision to buy property was made in April 1993, candidate...

Design of Sheet Pile Walls
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 15 From foundation exploration and testing procedures...

Blast Wall Bravura
Since the 1988 disaster on the Piper Alpha platform in the North Sea, which claimed 165 lives, legislation in the United Kingdom has required the operators of offshore installations to...

Guidelines for Evaluating the Performance of Highway Sound Barriers
Prepared by the Highway Innovative Technology Evaluation Center, a CERF Service Center. This report presents the HITEC evaluation plan for U.S. Gypsum's...

Wave Forces on Inclined and Vertical Wall Structures
This monograph, Wave Forces on Inclined and Vertical Wall Structures, contains 14 papers from nine countries. The information on these coastal...

Engineering a Landslide
A slope failure in northwest Alabama has been stabilized using a system of grouted INSERT piles to provide load transfer across the failure surface of the slide. This system, referred...

Rock Steady
Heavily damaged during the Loma Prieta earthquake, Oakland City Hall had to be repaired and retrofitted. Now Oakland boasts the tallest seismically isolated building in the world. The...

Foundation Upgrading and Repair for Infrastructure Improvement
This proceedings, Foundation Upgrading and Repair for Infrastructure Improvement consists of papers presented at the poster session held in...

Spacecraft Wall Design for Orbital Debris Impact
This paper describes a method for obtaining the optimal rise angle of corrugated bumpers for the design of space structures in the event of an on-orbit impact. The procedure determines...

Concrete Buildings in Regions of High Seismicity
Structural systems for multistory concrete buildings in regions of high seismicity are reviewed. The suitability and certain practical aspects of the systems are discussed. A Uniform Building...

Seismic Design of RC Structural Walls with Unsymmetrical Cross-Sections
An overview of seismic design issues and current experimental research for walls with unsymmetrical cross-sections is presented. The experimental studies include approximately 1/4 and...

Behavior of Foundations Subjected to Large Ground Movements
The behavior of twelve linear test foundations above an advancing longwall coal mine panel was observed. Three phases of deformation were observed in the centerline foundations: tension,...

Composite Walls as Shear Elements in Tall Structures
This paper describes a system of composite walling that can be used as a lateral load resisting system in tall structures. The composite walling comprises two skins of profiled steel sheeting...

Strut-Tie Model Design of Disturbed Regions in Concrete Structures
The design of disturbed (highly non-linear behavior) regions in concrete structures is illustrated using strut-tie approach. The use of this approach assisted with interactive computer...

Case Study - Performance of Diaphragm Walls During Construction; Predictions vs. Field Measurements
Rigid diaphragm walls (slurry walls) are being used more than any other earth supporting system for underground construction projects in confined downtown sites throughout the United States...

Seismic Strengthening of URM Buildings with Steel Bracing
Unreinforced masonry (URM) buildings with large open fronts are extremely vulnerable to seismic inputs posing serious life safety hazard. Steel bracing systems have been used to upgrade...

Tests of Full-Size Pretensioned AASHTO Beams with Debonded Strands
A summary of an experimental investigation dealing with the effects of strand debonding on the flexure and shear behavior of simply supported pretensioned AASHTO beams with a cast-in-place...

Messeturm Tower: Frankfurt, Germany
A 256 meter (840 feet)tall office tower, currently the tallest building in Europe, has been constructed in Frankfurt Germany. The 7- story structure with 85500 square meter (920,000 square...

Gothic Structure and Design: Narbonne Cathedral
Viollet le Duc considered Narbonne Cathedral to be one of the best constructed Gothic buildings in France. The ambulatory piers are single courses of stone bonded into adjacent walls....

 

 

 

 

Return to search