A Light in the Deep: The Future of Offshore Site Investigations
For deep-water energy developments, hazard identification and risk assessments (that is, assessing the probability of occurrence along with the consequences of failure) are more important...

Review of Climate Science for Engineering Practice
Weather and climate are a factor in civil engineering design and practice. Weather is defined as the state of the atmosphere with respect to wind, temperature, cloudiness, moisture, pressure,...

Dynamic Shearing Properties Of Compacted Clay
A series of 116 Q-type triaxial compression tests was performed using specimens of Goose Lake clay compacted at water contents ranging from 9 percent dry of optimum to 3 percent on the...

Estimation of Consolidation Properties of Clay from Field Observations
Analyses to obtain theoretical time-settlement curves for embankments typically make use of soil properties measured in the laboratory on small disturbed samples subject to strain rates...

Failure of a Large Circular Excavation
A circular excavation, 117 feet (36 m) in diameter by 90 feet (27 m) deep, was designed by an experienced engineering firm and construction was performed by an experienced contractor....

Failure of a Twenty-Foot High Retaining Wall
A cantilever retaining wall, designed in apparent accord with provisions in a civil engineering handbook, failed soon after construction. Analyses of the causes of the failure are presented....

Effective Stress Theory of Soil Compaction
The shape of the moisture-density curve obtained from compaction tests has been explained in terms of capillarity and lubrication, viscous water, and physico-chemical interactions. None...

Finite Difference Analyses for Sand Drain Problems
The geotechnical literature contains a number of papers in which sand drain installations are described and field performance is compared with theoretical predictions. Some of the field...

Design and Installation of Auger Steel Catenary Risers
The Auger export pipelines are connected to the TLP by steel catenary risers (SCRs). This is believed to be the first time steel pipe has been used for catenary risers. SCRs offer advantages...

Geo-Shanghai 2014
Proceedings of the Geo-Shanghai 2014 International Conference, held in Shanghai, China, May 26-28, 2014. Sponsored by the Geo-Institute of ASCE. These...

Interactive Graphics Dynamic Analysis of Frames

Dynamic Stresses From Experimental and Modal Analyses

Dynamic Analysis of Equipment Structure Systems

Is There a Movement Toward Three-dimensional Slope Stability Analyses?
Over the past few years, interest in performing three-dimensional (3-D) slope stability analyses has surged. An increasing number of research papers on this topic are being published at...

What Is Foundation Failure?

Back-Analysis in Tunneling: Current State and Future Endeavors

The Failure of the South Pass 70 B Platform in Hurricane Camille

GPS Vectors, OPUS-S and OPUS-RS Observations in a Unified Adjustment

An Analysis of Data from Wave Recorders on the Pacific Coast of the United States

Building Code Requirements and Specification for Masonry Structures
Containing Building Code Requirements for Masonry Structures (TMS 402-11/ACI 530-11/ASCE 5-11), and Specification for Masonry Structures TMS 402-11/ACI 530-11/ASCE 6-11), and Companion Commentaries
Building Code Requirements and Specification for Masonry Structures contains two standards and their commentaries: Building Code Requirements for Masonry Structures (TMS 402-11/ACI 530-11/ASCE...

 

 

 

 

Return to search