Validation of Source-Term Models Using Natural Analogues
A comparison is made between the predicted distribution of copper calculated by the AREST source-term code and the measured profiles for copper surrounding a bronze cannon that was emplaced...
Research Program to Develop and Validate Conceptual Models for Flow and Transport Through Unsaturated, Fractured Rock
As part of the Yucca Mountain Project, our research program to develop and validate conceptual models for flow and transport through unsaturated fractured rock integrates fundamental physical...
Guide for Evaluating Engineering Software: Testing and Validation (book review)
Durability and Damage Tolerance Evaluations of Jet Transport Structures
Many design considerations are involved in ensuring structural integrity of Boeing jet transports, which have common design features validated by extensive analyses, tests, and service...
A Proposed Methodology for Validating Performance Assessment Models for the DOE Office of Civilian Radioactive Waste Management Program
The Department of Energy (DOE) has developed a draft methodology for validating performance assessment models that will be used in the licensing of high-level waste repository systems....
The Status of the Site Characterization and Validation Program in Phase III of the OECD/NEA Stripa Project
In 1980, the International Stripa Project was organized under the aegis of the OECD Nuclear Energy Agency for the purpose of conducting research, at the Stripa mine in Sweden, related...
Validation of a Traffic Modeling System for Detour Planning
The Downtown Seattle Transit Project (DSTP) was initiated as an effort to relieve existing traffic congestion in downtown Seattle. It consists primarily of a 1.3-mile electric-bus tunnel...
Data-Collection Program for Pamlico River Estuary Model Calibration and Validation
An investigation is being conducted to collect and interpret continuous records relating to the flow characteristics of the Pamlico River Estuary, North Carolina, and to calibrate and...
Validation and Recent Enhancement of a Three-Dimensional Curvilinear-Grid Finite-Difference Model for Estuarine, Coastal and Lake Circulation: CH3D
This paper describes the validation and recent enchancement of a three-dimensional curvilinear-grid hydrodynamic model: CH3D. The model employs finite-differences techniques and allows...
Validation of Hydrophysical Components of a One-Dimensional Lake Model
A dynamic one-dimensional lake model has been developed in alternative structures, MINLAKE and FRMPND, for water-quality control strategies and lake eutrophication studies. Hydrophysical...
The Validation Problem—Historical Developments
Validation of a probability consists of the estimation of the reliability of the probability. Validation is important when probabilities are based on data, rather than theoretical exercises....
Issues in the Validation of Probabilistic Methods
Probabilistic models are being used increasingly in safety assessments and regulatory decision-making. There is a need to relate the risks computed using these models to service data in...
LRFD for U. S. Bridge Design — Validation Issues
During the 1987 meeting of the AASHTO Subcommittee on Bridges and Structures, recommendations from the National Cooperative Highway Research Program (NCHRP), Project 20-7/31, regarding...
Development of a Test Validated Methodology for Predicting Concrete Containment Leakage
In the past several years, considerable research effort has been devoted by the Electric Power Research Institute and the U.S. Nuclear Regulatory Commission to the behavior of reactor...
Guide for Evaluating Engineering Software
This is a practical guide to the problem of assessing the suitability of computer software being considered for use in engineering analysis, design or decision making. Each chapter treats...
Validation and Intercomparison of Three-Dimensional Numerical Models of Estuarine and Lake Hydrodynamics
Three-dimensional numerical models have been developed and used to study the circulation and transport of water quality parameters in estuaries and lakes. This paper discusses two important...
Capital Cost Modelling for Micro-Hydro Appraisal
Empirical capital cost models for mini- and micro-hydro installations have not been validated with consistent site information. This paper reviews cost modelling techniques and describes...
Use of Simulation for Validation of Systems Approach to Project Appraisal
Stage-Frequency Analysis of Closed-Basin Lakes
Devils Lake in North Dakota is used as a case study for the model development and application. The basis of the relationship developed in this study is the separation of the annual maximum...
Schematization and Validation of 2DH Mathematical Models in Coastal Morphology
Return to search