A Combo Foundation Does the Job: Piled-Raft Foundation Design for a Supertall Skyscraper
Lotte World Tower is a 123-story, 555-m supertall skyscraper with a 6-level basement for retail and car parking located at Jamsil-dong in Seoul, South Korea. (Editor’s Note: For additional information,...

Under-Slab Utility Installation with Aggregate Piers: It's All About Planning
Aggregate pier ground improvement is commonly used in North America to support buildings. The technology has expanded in the last decade thanks to refinement and introduction of new techniques, more rigorous...

Immortal and Ethereal Beauty in Stone: The Taj Mahal
The Taj Mahal, probably one of the most beautiful structures in the world, has withstood the vagaries of history and the environment. Lengthy tomes have been written on its beauty and the details of the...

Mixed Foundations Resolve Complex Conditions
A 46-story residential tower currently under construction in downtown Boston abuts an existing parking garage, necessitating extreme care to ensure its stability amid tight space constraints. Part of the...

Next-Generation Sonar Improves on Best Existing Technology
A sonar system capable of visualizing underwater environments in real time can be used for underwater bridge inspections and other construction-related tasks....

Laying the Foundations (Part of "Designed for Durability")

Bridging the Hudson
Replacing New York State's Tappan Zee Bridge involved traversing more than just water; the team also crossed the hurdles of poor foundation conditions and the enormous scale of the crossing. Creative solutions...

Glacier Skywalk: Foundations for a Canadian National Park Landmark
Jasper National Park, the largest national park in the Canadian Rockies, is located in the Province of Alberta, north of Banff National Park and west of Edmonton. Declared a UNESCO World Heritage Site...

Calibration of Jackup Leg Foundation Model Using Full-Scale Structural Measurements
The fitness of jack-up rigs to operate in varying water depths and weather conditions is determined by "site-specific" structural assessments. These assessments are conducted by a wide range of companies...

Design of Submarine Pipelines Against Upheaval Buckling
This paper describes part of a comprehensive joint-industry project on upheaval buckling. It develops a semi-empirical simplified design method and detailed design methods based on a new numerical analysis,...

Foundation Reuse and Enhancement: A Viable Option for Bridge Widening and Replacement Projects
The transportation system in the U.S. includes over 607,000 bridges for grade separations, interchange configurations, and stream crossings. As governmental entities embark on the rehabilitation and rebuilding...

What Does the Case Law Say? Geotechnical Risk on Design-Build Projects
The growth of design-build (DB) contracting, particularly on public-sector civil projects, has generated a great deal of industry discussion over the age-old question of who should bear the risk of unforeseen...

A History of Deep Vibratory Methods for Ground Improvement: A Cost-Effective Foundation Solution for 80+ Years
Deep vibratory ground improvement methods, collectively referred to as vibro systems, have been utilized by the construction community in one form or another for the past 80 years. Development of the equipment,...

Ground Improvement for Underground Construction: The Good, the Bad, and the Ugly
Underground construction is "special" because the work may be performed at great depths and under high groundwater pressures. All too often, it seems to take place in urban areas where there is limited...

The 2010-2011 Canterbury, New Zealand, Earthquake Sequence: Impetus for Rethinking the Way We Evaluate and Mitigate Liquefaction
Liquefaction is a common cause of ground failure during earthquakes and is directly responsible for tremendous damage to infrastructure. Evidence of the impact of liquefaction includes failure of bridge...

Small Projects are Big Deals
Geotechnical engineers work on a wide array of projects, ranging from small retaining walls or pavement projects, to construction of dams, canals, and foundations for bridges and high-rise...

A Foundation Engineering Trip Down the Mississippi: Foundations for Mississippi River Bridges from Minnesota to Louisiana
Huckleberry Finn had his adventure, but for those interested in foundation engineering, this article will float you down the Mississippi River on your own encounter with the many bridges...

Spread Footings Revisited: Geotechnical Advances Lead to Expanded Use for Bridge Abutments
The Minnesota Department of Transportation (MnDOT) has historically used steel shell piles to support highway bridge structures, probably due to a blend of familiarity and efficiency among...

Screw Piles and Helical Anchors: 180 Years of Use in Geotechnical Engineering
Since 1836, screw piles and screw cylinders have been used successfully throughout the world to support a variety of large-scale, civil engineering structures. Their development and use...

Foundation Engineering...102
Most of our textbooks still separate foundation options into two simplistic categories: shallow or deep. That's why so many of us are geared toward thinking about the foundation...

 

 

 

 

Return to search