ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

The investigations: The World Trade Center towers
On Aug. 21, 2002, the National Institute of Standards and Technology announced it would conduct a building and fire safety investigation of the World Trade Center disaster. This investigation was conducted...

Your Numerical Model Begins at the Site Investigation � Phase Improving the Suitability of Numerical Geotechnical Modeling
The success of an advanced geotechnical numerical analysis depends foremost on a thorough geologic and geotechnical understanding of the site, and thus the geometric definition and adequacy of input parameters...

When AI Meets DIGGS � The Birth of a New Site Characterization Paradigm?
Drilling and sampling to obtain borehole logs, together with various in-situ testing, are usually performed to determine subsurface soil and rock profiles and their associated engineering properties. However,...

Practical Aspects Of Routine Geotechnical Site Investigations � They Should Be Anything But Boring!
It�s likely that on any given day there are hundreds of geotechnical site investigations in progress in North America alone. While many of these investigations are carried out in support of large projects,...

Site Constraints Complicate a Bulkhead Replacement: It Takes a Team to Overcome the Challenges
North American Aggregates (NAA), a leading supplier of aggregates in the New York area, recently constructed a new processing facility in Perth Amboy, NJ. One of the final components of the new facility...

Appraisal of Lightweight Moorings for Deep Water
This paper outlines the potential advantages of using lightweight fiber ropes for mooring floating production platforms. The influence of tether properties on mooring system response is discussed. It is...

Geotechnical Risk Management: The Five Non-Technical Topics that are Crucial for the Successful Practice of Geotechnical Engineering
It is fair to state that the aspects of civil design and construction referred to as geotechnical engineering can be characterized as inherently risky. Geologic processes are complex,...

Making Big Data Work for You and Your Project: A 3-D Geotechnical Model is a Smart Way to Work
Modeling the stratigraphy beneath a site and assigning soil and rock properties are important steps in geotechnical engineering. Geotechnical engineers often need to model ground conditions...

Hydrologic and Hydraulic Design Methods
Computational methods for hydrologic analysis, hydraulic functions, and treatment capacity of permeable pavements vary depending on the complexity of the design and level of detail in...

Dynamic Shearing Properties Of Compacted Clay
A series of 116 Q-type triaxial compression tests was performed using specimens of Goose Lake clay compacted at water contents ranging from 9 percent dry of optimum to 3 percent on the...

Estimation of Consolidation Properties of Clay from Field Observations
Analyses to obtain theoretical time-settlement curves for embankments typically make use of soil properties measured in the laboratory on small disturbed samples subject to strain rates...

Performance of Suction Caissons in Sand and Clay
The use of suction caissons (suction piles) in marine environments has been increasing in the last decade. A suction caisson is a steel pipe with an open bottom and a closed top that is...

Shear and Interface Strength of Clay at Very Low Effective Stress
Thin-specimen direct shear (TSDS) tests were conducted to measure the shearing strength of kaolinite, and interface strengths between kaolinite and acrylic plastic and anodized aluminum,...

Effective Stress Theory of Soil Compaction
The shape of the moisture-density curve obtained from compaction tests has been explained in terms of capillarity and lubrication, viscous water, and physico-chemical interactions. None...

Finite Difference Analyses for Sand Drain Problems
The geotechnical literature contains a number of papers in which sand drain installations are described and field performance is compared with theoretical predictions. Some of the field...

Pore Water Pressures in Unsaturated Soils
Unsaturated soils are three-phase systems composed of solid mineral matter, water, and air. Such soils may be formed by either natural or artificial means. Except in moist environments,...

Geo-Shanghai 2014
Proceedings of the Geo-Shanghai 2014 International Conference, held in Shanghai, China, May 26-28, 2014. Sponsored by the Geo-Institute of ASCE. These...

Improving Construction Quality by Seeing What's Hidden Underground
One of the challenges of deep foundation projects is the inability to see what's being built at depth. Construction is hidden below ground, in soil or rock conditions that...

Geotechnical Design Over Karst. It's All About the Water
Karst is a type of topography which is formed over soluble rocks, such as limestone, dolomite, or gypsum. An irregular bedrock surface is typical of most karst areas, along with sinkholes,...

Journal of Nanomechanics and Micromechanics
The Journal of Nanomechanics and Micromechanics brings science and applications together on nanoscale and nanostructured materials, with emphasis on mechanics, processing, characterization, design, modeling,...

 

 

 

 

Return to search