Strength Design in Aluminum
A Review of Three Codes
Prepared by the Task Committee on Strength Design in Aluminum of the Committee on Special Structures of the Committee on Metals of the Structural Engineering Institute of ASCE. ...

Structural Safety and Its Quality Assurance
Sponsored by Committee 9A/10 of the Council on Tall Buildings and Urban Habitat of the Structural Engineering Institute of ASCE. This report uses an...

Evaluation of the VERSA-LOK / Miragrid Reinforced Soil Wall System
Final Report
Prepared by the Highway Innovative Technology Evaluaton Center (HITEC), a service center of Civil Engineering Research Foundation. This evaluation...

Evaluation of the Retained Earth MSE Wall System
Final Report
Evaluation...

BP Bridge at Millennium Park, Chicago
The structural engineering design and constructive aspects of a unique stainless steel-clad pedestrian crossing at the Millennium Park in Chicago are presented. The overall bridge form...

On the Inelastic Design of Steel I Girder Bridges
This paper documents the development of a relatively easy to use set of effective plastic moment expressions and compares the performance of these equations with a series of experimental...

New Shear Stud Provisions for Composite Beam Design
The 2005 American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 2005) will contain significant changes to the shear connector provisions for...

The Modular Modeling System (MMS): A Toolbox for Water- and Environmental-Resources Management

Flood Frequency Prediction: A Methodology for Identifying Structural Uncertainty

Analysis of Dynamic Laterally Loaded Pile in Clay
Deflections of laterally loaded pile groups are strongly affected by the degree of pile head fixity. If the cap provides perfect restraint against rotation, deflections are only about...

Introduction

Safety Concepts and Risk Management

Roles of Regulations and Standards

Reliability Analysis

Reliability-Based Design

Reliability-Based Service Life Prediction and Durability in Structural Safety Assessment

Soils and Foundations

Assessment of Existing Structures

Quality Management of Structural Design

Human Error in Constructed Projects

 

 

 

 

Return to search