Impact of Chemically-Induced Clay Transport and Deposition on the Hydraulic Conductivity of a Natural Sand
The purpose of this paper is to understand in part the dynamic impact of surfactants on hydraulic conductivity for designing enhanced pump and treat operations. This paper has two aims:...

Impact of Ground Water Management on the Hydropattern of Wetlands
In this paper, we examine the effect of altering the pumping rates of a large municipal well field, on the hydropattern of the near by PENSUCO wetland. A flow model developed earlier using...

Neponset Fish Passage and Habitat Restoration Project
This project was initiated to examine the feasibility of restoring fish passage, aquatic habitat and riparian habitat on the downstream reach of the Neponset River in Milton and Boston,...

Practical Groundwater and Conjunctive Water Optimization
The Simulation/Optimization MOdeling System (SOMOS) makes it easy to do groundwater optimization modeling for a variety of scales and situations. The SOMOA module uses analytical equations,...

Decision Support System for Daily Real-Time Operations in the Geum River Basin, Korea
A joint international collaboration between the Korea Water Resources Corporation (KOWACO) and Colorado State University (CSU) has resulted in development of a decision support system...

The Accuracy of Extrapolated Design Estimates with Hydrologic and Environmental Models
Extrapolation error in water resources and environmental modeling has not been the subject of adequate study in the past. In research and design, estimates obtained from regression models...

Development and Application of a Decision Support System for Municipal Water Infrastructure Planning: Challenges and Successes
Many water utilities across the country continue to face the challenge of intelligent planning for cost effective, efficient operation, larger demands, stricter government regulations,...

Great Hall
One of the most provocative structures gracing the London landscape, the new City Hall, at More London, is also a world-class model of energy-efficient design....

Grand Finale
For 87 years Oklahoma's state capitol remained unfinished, the majestic cast-in-place concrete dome its designers envisioned never built. But as Oklahoma approached its centennial—to...

Failures and Problems with Lift-Slab Construction
This chapter provides an overview of failures and problems with lift-slab construction. Topics include jack systems with inadequate take-up devices; the Canadian wedge connection; Serra...

Initial Considerations
The purpose of this section is to aid the line designers in developing their specifications for fiber-reinforced polymer (FRP) materials utilized in electric overhead line structures....

Materials and Manufacturing Processes
This chapter introduces the basic materials used in the manufacturing of composite structures. It will help the line designer in understanding how the different elements of the fiber-matrix...

Design Loads
This chapter discusses the types of loadings that should be considered when designing overhead power lines utilizing fiber-reinforced polymer (FRP) poles. For infrastructure applications...

Performance-Based Criteria for FRP Products and Materials
In most ways, fiber-reinforced polymer (FRP) structures perform similar to wood and steel structures. There are, however, certain differences and these differences are described in this...

Assembly and Erection
This chapter is intended to provide recommendations on transporting, handling, assembling, and erecting fiber-reinforced polymer (FRP) poles. An important consideration is that FRP poles...

Model Water Sharing Agreements for the Twenty-First Century
Sponsored by the Task Committee for the Shared Use of Transboundary Water Resources of the Environmental and Water Resources Institute and the Laws and Institutions Committee of ASCE....

Evaluation of the Geo-Con Vert Wall System
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF/IIEC Innovation Center This report describes a HITEC evaluation designed...

Structure as Art
The structural engineering to support the architecture of a free-form, Frank Gehry-designed building is never easy, but the engineers for a new university building devised several innovative...

Evaluation of the Inter-Lok Retaining Wall System
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF/IIEC Innovation Center. This report describes a HITEC evaluation designed...

Breakwaters '99
First International Symposium on Monitoring of Breakwaters
The papers present state-of-art methods and technologies that are used in the structural and environmental monitoring of rubble mound breakwaters. Structural monitoring concerns the structural...

 

 

 

 

Return to search