Effect of Grade Control Structures on DEC Streams
Controlling the grade of a channel with structures has been an effective means applied to streams. Although, the effectiveness of grade control structures is not readily apparent until...
Siting of Grade Control Structures
In siting a grade control structure in a stream, hydraulic considerations must be integrated with other important siting factors. A review of several of the important siting factors is...
White River Fish Screen Project?Hydraulic Modeling
In 1983, Puget Sound Power and Light Company (Puget Power) proposed in a license application to FERC for the overall White River Project replacement of the existing fish screens constructed...
An LPI Numerical Implicit Solution for Unsteady Mixed-Flow Simulation
A Local Partial Inertia (LPI) technique is developed as an option within the National Weather Service (NWS) FLDWAV dynamic flood routing model to enhance its capability to model unsteady...
Depth-Averaged Boussinesq Equations Applied to Flow in a Converging Channel
Supereritical flow in a contracting channel is simulated by numerically solving the 2D depth-averaged Boussinesq equations using a fmite-difference model DASH (Molls and Chaudhry 1995,...
Dam Foundation Erosion Study: The Design of a Sidewall Orifice for Simulation of a Free Trajectory Overtopping Jet
This paper describes the design of a sidewall discharging orifice for simulation of a free trajectory overtopping jet. A sidewall orifice discharges through the sidewall of a pipe. The...
Analysis of Bank Stabilization in Steep Complex Streams Using A Two-Dimensional Model
In cases where the channel is fairly uniform, and not divided, one-dimensional hydraulic models, such as HEC-2, generally give adequate results for scour evaluations and bank protection...
Santa Clara River Fluvial Analysis
The Santa Clara River watershed, located in Los Angeles County, has been subject to rapid increases in population and urban development, resulting in channelization, new bridges, and increased...
Genetic Algorithm Design of Piped Irrigation Systems
The design of piped irrigation systems is a complex matter. In its simplest form it involves the selection of the sizes of pipes and other hydraulic elements so as to ensure that the varying...
Efficient Pump Representation for Fixed-Grid MOC in Pipeline Systems
An explicit solution of the pump power failure boundary condition is shown to have many computational advantages over the conventional implicit pump boundary condition solution (i.e.,...
Effects of Approach Flow Conditions on Pump Sump Design
An important obstacle to the development of a generalized sump design is the variability of flow conditions in approach areas. The geometry and alignment of the areas immediately upstream...
Simulating Evapotranspiration on Semi-Arid Rangelands
Detailed simulations of the surface energy balance using the Simultaneous Heat and Water (SHAW) model were compared with measurements collected at the Reynolds Creek Experimental Watershed...
The Scour at Bridges Management Program in Rhode Island
The Rhode Island Department of Transportation (RIDOT) has developed and implemented a comprehensive two-phase scour susceptibility program for screening and assessment of scour at bridges....
Hydraulic Studies for a Large Wetland
Coastal wetlands are highly biologically productive and provide spawning and feeding habitats for many aquatic organisms. As has happened to freshwater wetlands, about half of the tidal...
Feasibility of Modeling Phosphorus Dynamics in Stormwater Wetlands
This research, underway at the University of Guelphs School of Engineering, studies the feasibility of modeling phosphorus assimilative capacity by stormwater wetlands in cold climates....
Rational Design and Operation of Packed Bed Adsorption Reactors
Design of packed bed adsorption reactors is based presently upon the parameter empty bed contact time (EBCT), a fallacious concept. The column wave front behavior, instead, should be the...
Rock Riprap for Grade Control
Rock chutes (riprap channels on steep slopes) are used as grade control structures to safely conduct a water flow to a lower elevation. Common procedures used for design of rock riprap...
Grade-Control Structures for Salt River Channelization
Soil cement grade-control structures have been designed and constructed in conjunction with channelization projects along the Salt River in Phoenix, Arizona. The structures were designed...
Comparison of Stochastic Programming and Robust Optimization Models for Groundwater Plume Containment
Stochastic optimization models for containing a groundwater contaminant plume through the installation and operation of pumping wells are developed. Two related formulations are presented?stochastic...
The Impact of Numerical Precision on Optimal Groundwater Hydraulic Control
The numerical precision retained in the formulation of groundwater hydraulic control optimization problems can have significant impacts on the accuracy of the solution. Sources of imprecision...
Return to search