Soil Mixing: A New Approach to Soft Soil Stabilization for Structural Support

Lateral Loading & Seismic Response of CIDH Pile Supported Bridge Structures

Soil Improvement and Liquefaction Mitigation by Deep Dynamic Compaction

Assessment of SIMBAT® Dynamic Pile Tests

Shear Key Reinforced DSM to Stabilize Excavation Support Walls

A DSM Wall for Excavation Support

Sinkhole Remediation beneath a Damaged Structure

Design Analysis & Field Verification of Alameda Corridor Retaining Walls

Lime Cement Columns for the Reconstruction of Interstate 15 in Salt Lake City, Utah

Ground Modification and MSE Retaining Walls at Johnson C. Smith University, Charlotte, NC

Modeling of Inelastic Behavior of RC Structures under Seismic Loads
Proceedings of the U.S.–Japan Seminar on Post-Peak Behavior of Reinforced Concrete Structures Subjected to Seismic Loads: Recent Advances and Challenges on Analysis and Design, held in...

Symptom-Based Reliability of Aging Infrastructure Systems
Ideally, aging infrastructure systems should be monitored for safety and repaired in case of need. Eventually, authors believe that symptom-based reliability will be useful for safety...

Smart Online Structural Monitoring and Diagnosis
(abstract only) This paper describes the observation matrix as innovative monitoring and diagnosis: (1) The matrix elements of the observation matrix multiplied by its transposed serve...

Cross-Frame and Diaphragm Behavior in Skewed Bridges
The author examines the existing specifications and guidance for bracing provisions by AASHTO, AISC, and TxDot, and the need for developing bracing requirements....

Maintenance of Diaphragm-Girder Connections
Fatigue cracking at diaphragm-girder connections and at similar connections of cross-frames and floorbeams have been common in steel highway bridges for the past 20 or 30 years. Fatigue...

A Framework for Performance-Based Seismic Design
The following probabilistic framework for seismic performance assessment is presented as an effective foundation for the development of performance-based guidelines. It suggests a generic...

Effect of Column-to-Beam Strength Ratio on Seismic Performance of RC Moment Frames
Reinforced concrete (RC) moment frames are often used in building applications. During strong earthquake excitations, such buildings have been subject to soft-story or column sidesway...

The Effect of the Slab on Beam-Column Joint Behavior
The three-dimensional effect of slab interaction on frame behavior has been observed in lateral load tests on beam-column-slab elements....

New Concepts in Structural Strength Assessment for Large Buildings in Fire
This paper presents theoretical descriptions of the key phenomena that govern the behaviour of composite framed structures in fire. These descriptions have been developed in parallel with...

Performance of Masonry in Disasters: Lessons Learned and Research Needs Identified
This presentation described in this extended abstract is one of several in a panel discussion entitled Enhanced Research in Masonry. The objectives of the presentation are to discuss the...

 

 

 

 

Return to search