Building Code Requirements and Specification for Masonry Structures
Containing Building Code Requirements for Masonry Structures (TMS 402-08/ACI 530-08/ASCE 5-08, Specification for Masonry Structures (TMS 602-08/ACI 530.1-08/ASCE 6-08) and Companion Committees
The Code covers the design and construction of masonry structrures while the Specification is concerned with the minimum construction requirements for masonry in structures. Some of the...

2008 Civil Engineering Industry Buyer' Guide
A Special Supplement to Civil Engineering Magazine
This guide covers the following topics: Construction materials; Geotechnical and environmental; Information technology; Pipelines, sewers, and accessories; Professional and professional...

Probabilistic Fatigue Analysis of Fixed Offshore Structures

Direct Causes of the Catastrophe
This chapter examines direct physical causes of the hurricane protection system failures, including soil strength assessments and pumping station limitations....

Structural Condition Assessment
In Structural Condition Assessment, editor-in-chief Robert Ratay gathers together the leading people in the field to produce the first unified resource on all aspects of structural condition...

Concrete Biaxial Column: Introduction
This chapter introduces the subject of concrete biaxial columns....

Concrete Biaxial Column: Composite Circular Column
This chapter discusses the tabulation of composite circular column data in Microsoft Excel....

Concrete Biaxial Column: Partial Shell
This chapter discusses the tabulation of partial shell data in Microsoft Excel....

Concrete Biaxial Column: Photographs
This chapter includes photographs of concrete biaxial columns....

Embed
This chapter discusses the tabulation of tension, compression, and flexural development data in Microsoft Excel....

Inelastic Analysis of Fixed Offshore Platforms for Earthquake Loading

Strength Design in Aluminum
A Review of Three Codes
Prepared by the Task Committee on Strength Design in Aluminum of the Committee on Special Structures of the Committee on Metals of the Structural Engineering Institute of ASCE. ...

On the Inelastic Design of Steel I Girder Bridges
This paper documents the development of a relatively easy to use set of effective plastic moment expressions and compares the performance of these equations with a series of experimental...

New Shear Stud Provisions for Composite Beam Design
The 2005 American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 2005) will contain significant changes to the shear connector provisions for...

Flexural Behavior of Drilled Shafts with Minor Flaws

A More Perfect Union
Established to promote greater public understanding of the United States Constitution, the National Constitution Center facility in Philadelphia is a structure of complex geometries articulated...

Flexural Behavior of Slender Post-Tensioned Masonry Walls
The 2002 edition of the Masonry Standards Joint Committee (MSJC, 2002) design provisions for masonry structures includes a chapter on the design of post-tensioned masonry (PTM) walls with...

Torsion of Reinforced Concrete -A Historical Overview
The story of torsion of reinforced concrete must start with the French professor, C. L. Navier. In his landmark book (Navier, 1826) he rigorously derived the first rational theory for...

Overview of Structural Behavior of Members Subjected to Torsion
The torsion strength of concrete beams depends on many factors, such as the amount of reinforcement, the volumetric ratios of longitudinal and transverse steel bars, the concrete strength,...

Advances in Analytical Modeling of Torsional Members
The basic formula for calculating the torsional strength of reinforced concrete members was developed by Rausch (1929) using the space truss concept. Unfortunately, Rausch's equation may...

 

 

 

 

Return to search