Built-Up Compression Members for Noval Structural Systems
This paper discusses built-up compression members used in novel structural systems for two high-rise buildings: InterFirst Plaza at Dallas Main Center and Columbus Center in New York....

Design of Built Up Compression Members for Long Span Bridge Structures
This paper discusses the design of built up compression members for long span bridge structures including trusses and arches. Provisions of load factor design and use of high strength...

QST Rolled Shapes, a New Generation of HSLA Compression Members
With the development of the Quenching and Self-Tempering (QST) process by the Luxembourg steelmaker ARBED S.A., a new generation of High Strength Low Alloy (HSLA) rolled shapes has become...

Creep and Shrinkage of Composite Columns in Tall Buildings
The simultaneous presence of steel and composite columns in tall buildings is a common occurrence. The axial shortening characteristics of composite columns are influenced by creep and...

Performance and Serviceability of Composite Floors
Concrete slabs on steel deck are the most common type of floor system in use today. This system of construction is particularly advantageous when ultimate strength design (LRFD) is used....

Achieving Level Composite Steel Floors
Constructing deflected composite steel floors that are level is a complex operation, and one which requires cooperation and an exchange of information between the structural engineer and...

Vibration and Impact in Skewed Steel Bridges
The vibration and impact of skewed multigirder bridges due to vehicles moving across rough bridge deck are studied. The bridges are modeled as grillage beam systems. The vehicle is simulated...

Magnetic Flux Leakage for Bridge Inspection
For many years the Federal Highway Administration and before that the Bureau of Public Roads had focused its nondestructive evaluation program on development of better tools to inspect...

Full Scale Dynamic Monitoring of Highway Bridges
Sensitivity of identified modal properties by physical testing is critical for automated monitoring of bridge structural condition. It is investigated here considering flexure modes and...

What is Optimization?
Basic concepts of optimization are described using design of a plate girder as an example. First, a way to formulate the problem as an optimization problem is presented. Then basic terminologies...

How to Optimize Reinforced Concrete Systems
A straightforward procedure for the optimization of member dimensions and reinforcement design in concrete structures consisting of beams, slabs, and columns is presented. The procedure...

How to Optimize Steel Frameworks
This paper presents the details of a design synthesis strategy to conduct computer-automated design of least-weight structural steel frameworks, where members are automatically sized using...

Steel Fiber Reinforced Shotcrete?An End-User Prospective
Nearly 15 years of experience demonstrates that steel reinforcing fibers in shotcrete offer considerable advantages to all end-users: designers, contractors and owners. These include demonstrable...

Large Scale Testing of Shotcrete
A large scale test program was carried out to evaluate the relative roles of steel fiber and mesh reinforced shotcrete for hard rock stabilization. The most realistic conditions in a tunnel...

What Does Bring Ductility to Steel Fibre Reinforced Shotcrete?
It is generally accepted that ductility is the main characteristic of SFRS. Tests on scale 1/1 have been conducted to determine the influence of ductility on the bearing capacity and crack...

A Comparative Study of Different Steel Fibers in Shotcrete
Two steel fiber reinforced shotcrete (sfrs) test programs have been carried out in eastern Canada using steel fibers which are available in the north American marketplace. The first program...

The Use of Yield-Line Theory in the Design of Steel-Fibre Reinforced Concrete Slabs
Using yield line calculations for steel fibre reinforced slabs a formula for the design strength of shotcrete linings is developed. The formula establishes a connection between the toughness...

Steel Fibre Reinforced Shotcrete Design
There is a need for introducing toughness and ductility in SFRS design. The Japanese Standard introduces the equivalent flexural strength, which characterizes SFRS toughness and allows...

Application of Shotcrete for Ground Support at Inco Mines
In 1989, shotcrete was first successfully introduced for ground support in production areas at Frood Mine. Until then the only successful application of shotcrete had been in major permanent...

MASSPORT Modernization
Construction began last fall on the Massachusetts Port Authority (MASSPORT) upgrade of the 50-year-old Paul W. Conley Terminal in Boston. When completed in 1994, this timber-pile-supported...

 

 

 

 

Return to search