Stabilizing Variable and Sloping Ground: Achieving Innovation Through Adaptation
We all know the high price of land development these days, so it's more important than ever for owners and their designers to maximize available land area. Occasionally, this demand is constrained by topography...

Optimized Drilled Shaft Design through Post-Grouting: Shorten That Shaft for Better Performance
Tip post-grouting is a technique used to inject, under pressure, a neat cement grout beneath the base of a drilled shaft. This method enhances or improves axial load-displacement performance by increasing...

Geotechnical Aspects of Pavements: There's More to Roads than Asphalt and Concrete!
When you jump on the highway to make that commute to work, do you think much about what's under the surface you ride on? Pavements are layered systems designed to provide a strong structure to support...

Improving Cost and Schedule Performance on Municipal Pipeline Projects: Realizing the Benefits of the Construction Manager at Risk (CMAR) Alternative Project Delivery Method
The water and wastewater infrastructure in the United States is failing. In its 2013 Report Card on American Infrastructure, ASCE stated: "The water and wastewater...

The Evolution of Launched Soil Nails: A 30-Year Retrospective
Launched soil nails are a unique remedial technology in the geotechnical construction toolbox. These 20-ft-long, 1.5-in.-diameter nails are installed in a single shot using a compressed air "cannon" at...

A History of Deep Vibratory Methods for Ground Improvement: A Cost-Effective Foundation Solution for 80+ Years
Deep vibratory ground improvement methods, collectively referred to as vibro systems, have been utilized by the construction community in one form or another for the past 80 years. Development of the equipment,...

Ground Improvement for Underground Construction: The Good, the Bad, and the Ugly
Underground construction is "special" because the work may be performed at great depths and under high groundwater pressures. All too often, it seems to take place in urban areas where there is limited...

Extreme Makeover: Interchange Gets Ground Improvement Facelift
As part of the massive, $159.9 million Interchange 14A Improvement Project in the cities of Bayonne and Jersey City, NJ, the New Jersey Turnpike Authority (NJTA) is realigning 12 ramps and roadways and...

The 2010-2011 Canterbury, New Zealand, Earthquake Sequence: Impetus for Rethinking the Way We Evaluate and Mitigate Liquefaction
Liquefaction is a common cause of ground failure during earthquakes and is directly responsible for tremendous damage to infrastructure. Evidence of the impact of liquefaction includes failure of bridge...

Biogeotechnical Mitigation of Earthquake-Induced Soil Liquefaction
Three biogeotechnologies currently under development show promise for cost-effective remediation of liquefaction under existing facilities....

Geotechnical Risk Management: The Five Non-Technical Topics that are Crucial for the Successful Practice of Geotechnical Engineering
It is fair to state that the aspects of civil design and construction referred to as geotechnical engineering can be characterized as inherently risky. Geologic processes are complex,...

Evaluation of Vertica Retaining Wall Systems
Prepared by the Highway Innovative Technology Evaluation Center (HITEC). This report describes a HITEC evaluation designed to determine the basic capabilities...

A Light in the Deep: The Future of Offshore Site Investigations
For deep-water energy developments, hazard identification and risk assessments (that is, assessing the probability of occurrence along with the consequences of failure) are more important...

Making Big Data Work for You and Your Project: A 3-D Geotechnical Model is a Smart Way to Work
Modeling the stratigraphy beneath a site and assigning soil and rock properties are important steps in geotechnical engineering. Geotechnical engineers often need to model ground conditions...

Becoming Greener with Green Sand: An Iron Castings Company Devises an Environmentally Friendly Liner System Reusing Foundry Byproduct
Metalcasting is one of the oldest methods of recycling—humans have a few millennia worth of experience with the technique—but today's industry still battles public preconceptions...

Summary, Conclusions, and Recommendations
Civil engineers have responsibilities for the planning, design, construction, operation and maintenance of physical infrastructures. These infrastructures include all types of buildings,...

Appendix A Lake Superior Regulation: Addressing Uncertainty in Upper Great Lakes Water Levels
Back matter pages come after the papers or chapters in a published work. This back matter contains Lake Superior regulation: addressing uncertainty in upper great lakes water levels....

Journal of Sustainable Water in the Built Environment
The Journal of Sustainable Water in the Built Environment presents activity and research developments in water issues, challenges, and opportunities throughout the developed landscape. The scope covers...

Evaluating Bridges With Unknown Foundations for Susceptibility to Scour: North Carolina Applies Risk-Based Guidelines to Over 3,750 Bridges
Scour occurs when flowing water removes erodible material such as sand and rock. For bridges over water, scour affects the stability of pier and abutment foundations and contributes to...

National Usage of Geosynthetic-Reinforced Soil to Support Bridges
The Geosynthetic-Reinforced Soil Integrated Bridge System (GRS IBS) was developed by the Federal Highway Administration (FHWA) almost 20 years ago to help meet the demand for the next...

 

 

 

 

Return to search