Your Numerical Model Begins at the Site Investigation � Phase Improving the Suitability of Numerical Geotechnical Modeling
The success of an advanced geotechnical numerical analysis depends foremost on a thorough geologic and geotechnical understanding of the site, and thus the geometric definition and adequacy of input parameters...

When AI Meets DIGGS � The Birth of a New Site Characterization Paradigm?
Drilling and sampling to obtain borehole logs, together with various in-situ testing, are usually performed to determine subsurface soil and rock profiles and their associated engineering properties. However,...

Practical Aspects Of Routine Geotechnical Site Investigations � They Should Be Anything But Boring!
It�s likely that on any given day there are hundreds of geotechnical site investigations in progress in North America alone. While many of these investigations are carried out in support of large projects,...

Moving Down the Road of Progress: Geosynthetics Subdue Failures on Expansive Clays and Frost-susceptible Soils
Using geosynthetics in roadway projects has provided sustainable alternatives for reconstruction and maintenance and now represents a significant portion of the total geosynthetics market. Geosynthetics...

Sediment Pollution: Solving "Rill" Problems Using RECPs
Sediment pollution causes an estimated $16 billion in environmental damage annually. Sediment is the most common pollutant in rivers, streams, lakes, and reservoirs, causing such negative effects as temperature...

70 Years of Soil-Bentonite Slurry Walls: So, What's New
The soil-bentonite slurry wall (SBSW) is an established ground improvement technology that continues to find applications. It�s often the best and most economical vertical barrier to essentially stop lateral...

A Brief History of Jet Grouting in the Last 50 Years: The Story of Its Evolution
Jet grouting, a grouting soil improvement construction technique, was first developed in Japan in the 1960s and 1970s, and then introduced in Europe a few years later in the form of a proposal for soil...

Errata for "Moving Down the Road of Progress: Geosynthetics Subdue Failures on Expansive Clays and Frost-susceptible Soils"

Working Platforms for Specialty Geo-Construction
A major cause of rigs toppling over is the state of the "working platform" that they must work from. A working platform is a layer of material, often compacted sand or gravel, placed over the subgrade,...

Years of Planning for the South San Francisco Bay Shoreline Project: Now It�s Time to Build! Rapidly but Gently!
When a complicated project is completed, and you ask the engineers, "What was the most challenging part of this project?" a couple of difficulties usually come to mind. We�ve all heard war stories from...

Seismic Performance of a Deep Soil Mixing Grid: A Magnitude 7.1 Load Test at the Port of Alaska
The Port of Alaska in Anchorage (Port) has embarked on a multiphase modernization program that includes the development of a new petroleum and cement terminal (PCT) berth. The berth consists of a pile-supported...

Intergalactic Soil Nails: Excavation Support for the Deep Space Auditorium
A software company based outside Madison, Wis., had a need for an auditorium as part of its campus expansion in 2011. The 829,000-sq-ft, 11,400-seat "Deep Space" auditorium was to be built underground,...

Test Your Soil Models Against the Case Data Base

Correction to "Highway Embankment Failure on Soft Clay � Bad Input = Bad Output"

Subsurface Constructors, Inc. Adds to Ground Improvement Team

Soil Improvement Committee

Sonnet on Earth Pressures

Ground Improvement

Geotechnical Risk Management: The Five Non-Technical Topics that are Crucial for the Successful Practice of Geotechnical Engineering
It is fair to state that the aspects of civil design and construction referred to as geotechnical engineering can be characterized as inherently risky. Geologic processes are complex,...

Making Big Data Work for You and Your Project: A 3-D Geotechnical Model is a Smart Way to Work
Modeling the stratigraphy beneath a site and assigning soil and rock properties are important steps in geotechnical engineering. Geotechnical engineers often need to model ground conditions...

 

 

 

 

Return to search