Your Numerical Model Begins at the Site Investigation � Phase Improving the Suitability of Numerical Geotechnical Modeling
The success of an advanced geotechnical numerical analysis depends foremost on a thorough geologic and geotechnical understanding of the site, and thus the geometric definition and adequacy of input parameters...
Intelligent Geo-Construction Drilling Equipment: Delivering More Than Meets the Eye
The complexity, risk, and demands of engineered geo-structural projects have increased, seemingly exponentially, through the years. Physical and capital resources to deliver such projects, however, have...
Delegate, Network, and Ask for What You Want
Justin Siegrist, P.E., M.ASCE, is the hydraulic modeling lead in the Cincinnati office of Wade Trim. His advice to young engineers: delegate, network, and ask for what you want....
Calibration of Jackup Leg Foundation Model Using Full-Scale Structural Measurements
The fitness of jack-up rigs to operate in varying water depths and weather conditions is determined by "site-specific" structural assessments. These assessments are conducted by a wide range of companies...
A Preliminary Case for the Existence of Hurricane Alleys in the Gulf of Mexico
A review of hurricance intensity in the Gulf of Mexico suggests there are two alleys where hurricanes are roughly 20% more intense than elsewhere. This paper develops a physical basis for the alleys using...
Making Big Data Work for You and Your Project: A 3-D Geotechnical Model is a Smart Way to Work
Modeling the stratigraphy beneath a site and assigning soil and rock properties are important steps in geotechnical engineering. Geotechnical engineers often need to model ground conditions...
BIM in Geotechnics: The Benefits of Including Geotechnical Data in Building Information Modelling
Building Information Modelling (BIM) is becoming increasingly common around the world on building and civil engineering projects, but what are the benefits to geotechnical engineers and...
Hydrologic and Hydraulic Design Methods
Computational methods for hydrologic analysis, hydraulic functions, and treatment capacity of permeable pavements vary depending on the complexity of the design and level of detail in...
Geo-Congress 2014
Technical Papers and Keynote Lectures
Proceedings of the 2014 Geo-Congress, held in Atlanta, Georgia, February 23-26, 2014. Sponsored by the Geo-Institute of ASCE. GSP 234, Geo-Congress...
Groundwater Flow Model Development at the Nevada Test Site
The Underground Test Area Project (UGTA) of the National Nuclear Security Administration.s Nevada Site Office is in the process of assessing and developing regulatory decision options...
Simulating Radionuclide Transport Away from an Underground Nuclear Test: Linking Non-Isothermal Flow and Mechanistic Reactive Transport
The low-yield (0.75 kiloton) Cambric underground nuclear test situated in alluvium below the water table offers unique perspectives on radionuclide transport in groundwater. The Cambric...
Maximum Weighted Log-Likelihood Estimation for Parameterization Selection Uncertainty
Hydraulic conductivity identification remains a challenging inverse problem in groundwater modeling because of inherent non-uniqueness and lack of flexibility in parameterization methods....
Evaluation of a Bias Aware Ensemble Kalman Filter Using a Scaled Aquifer Transport Experiment
In this study, a bias-aware Ensemble Kalman Filter (EnKF) is applied to a scaled aquifer transport experiment (1-cm of the model equals 1-m at field scale and 1-day of model transport...
Groundwater Transport Modeling Using Fuzzy Sets and Fuzzy Logic
Modeling of groundwater flow and transport is inherently uncertain. The predictive capability of the model depends upon both the quantity and quality of hydrogeologic data. The introduction...
Evaluation of IA SWAT Testing Protocol for ET Controllers
In recent years the Irrigation Association (IA) has developed a testing protocol for Smart Water Application Technologies (SWAT). These technologies consist of irrigation controllers such...
Effects of Impervious Area Estimation Methods on Simulated Peak Discharges
The variability of simulated flood discharges is evaluated using two methods for estimating impervious surfaces and common design methods in the Mission Creek watershed (31 sq km) located...
Floodplain Delineation of the Ranillas Meander in Zaragoza Using GUAD-2D
After the selection of Zaragoza (Spain) as the host city of the International Expo 2008, the
An Experimental Study on the Behaviour of Full-Scale Composite Steel Frames under Furnace Loading
In view of recent large fires in tall buildings, such as One Meridian Square (USA), East Tower Central Park (Venezuela), World Trade Center (USA) and Windsor Tower (Spain), there has been...
Analytical Solutions for Coupled Reactive Transport Equations
Modeling the transport of reactive contaminants is one of the key challenges faced by groundwater engineers worldwide. Specifically, problems involving the transport of sequentially decaying...
Optimal Resource Allocation for the Cleanup of Petroleum Contaminated Sites
Site rehabilitation is conducted in many states using a risk-based corrective action process wherein alternative remedial actions are evaluated and implemented, depending on the level...
Return to search