Crossing the Forth
Scotland’s Queensferry Crossing spans the Firth of Forth, connecting Edinburgh and the Kingdom of Fife. Built at a cost of $1.89 billion in six and a half years, the 1.6 mi long cable-stayed bridge, with...

Rapid Recovery
In May 2017, the California Department of Transportation had to contend with a massive landslide that closed a section of the iconic State Route 1 through central California’s scenic coastal region of...

Permanent Sensors Turn Construction Project into Long-term Research Study (part of "Room To Grow")
The Centre for Smart Infrastructure and Construction (CSIC) at Cambridge University, in conjunction with Arup, has placed fibre-optic cables that will serve as permanent sensors on the underground structure...

A Different Angle (part of "West Side Extraordinary")
The unique, sloping shape of the VIA 57 West building is formed from cast-in-place concrete from the single, partial basement level up to the structure's 34th floor; braced galvanized steel framing completes...

NTSB Issues Preliminary Report on Florida Bridge Collapse (part of Infrastructure Solutions: Bridges Move Forward)
In late May, the National Transportation Safety Board (NTSB) released its preliminary report about the March 15 structural failure and collapose of a partially-constructed pedestrian bridge in Miami....

Rock Glue Gets the Job Done: Reducing Rockfall Hazards along the G.W. Parkway
After a large rockfall damaged the road and disrupted traffic along the George Washington Memorial Parkway in 2002, the National Park Service was looking for solutions to stabilize the slope against additional...

Calibration of Jackup Leg Foundation Model Using Full-Scale Structural Measurements
The fitness of jack-up rigs to operate in varying water depths and weather conditions is determined by "site-specific" structural assessments. These assessments are conducted by a wide range of companies...

Heave Compensated Landing System - A Novel Tool for Subsea Intervention
This paper presents a new intervention system that allows the use of a low cost workboat to deploy and recover delicate payloads in subsea installations. Vessel motions are decoupled from the subsea package...

Nature Sides with the Hidden Flaw: Lessons Learned from Failures of Earth-Support Systems
In recent years, the demand for excavations and fills of significant height has increased due to many factors, including requirements for below-grade parking for urban buildings and the need to construct...

Emergency Retaining Wall Replacement: The East 26th Street Slide Repair in Baltimore, MD
During a record rainfall on April 30, 2014, a century-old, stone retaining wall between a dense urban roadway (26th Street) and the CSXT railroad track in Baltimore, MD, failed. The stone retaining wall...

Highway Retaining Walls are Assets: A Risk-Based Approach for Managing Them
Throughout history, retaining walls (RWs) have served a vital role in supporting civil infrastructure. The ruins of dry stone walls that purportedly supported the hills and slopes of ancient Rome can be...

Geotechnical Aspects of Pavements: There's More to Roads than Asphalt and Concrete!
When you jump on the highway to make that commute to work, do you think much about what's under the surface you ride on? Pavements are layered systems designed to provide a strong structure to support...

Performance-Based Earthquake Engineering: What Can It Do for You?
There's been a lot of talk, and some confusion, lately about performance-based earthquake engineering (PBEE). Many geotechnical engineers wonder -- what is it, how does it differ from what I've been doing,...

The 2010-2011 Canterbury, New Zealand, Earthquake Sequence: Impetus for Rethinking the Way We Evaluate and Mitigate Liquefaction
Liquefaction is a common cause of ground failure during earthquakes and is directly responsible for tremendous damage to infrastructure. Evidence of the impact of liquefaction includes failure of bridge...

You Designed It for the Big One, Right? Illustrating and Communicating Uncertainty in a Deterministic Seismic Hazard Analysis
In seismic regions of the U.S. and worldwide, engineers design structures to withstand seismic ground motions resulting from a large, rare earthquake. But definitions of "large" and "rare" depend on who...

Small Projects are Big Deals
Geotechnical engineers work on a wide array of projects, ranging from small retaining walls or pavement projects, to construction of dams, canals, and foundations for bridges and high-rise...

Innovations in Geosynthetic Rolled Erosion Control Products: From Forests to Fibers
Over the last 50 years, many different types of geosynthetic rolled erosion control products (RECPs) have emerged, ranging from different structure types to different fiber types. Natural-fiber...

Evaluation of Vertica Retaining Wall Systems
Prepared by the Highway Innovative Technology Evaluation Center (HITEC). This report describes a HITEC evaluation designed to determine the basic capabilities...

Screw Piles and Helical Anchors: 180 Years of Use in Geotechnical Engineering
Since 1836, screw piles and screw cylinders have been used successfully throughout the world to support a variety of large-scale, civil engineering structures. Their development and use...

Foundation Engineering...102
Most of our textbooks still separate foundation options into two simplistic categories: shallow or deep. That's why so many of us are geared toward thinking about the foundation...

 

 

 

 

Return to search