Hydrodynamic Damping on Flexible Cylinders in Sheared Flow

Parallel Wire Resistance Wave Meter

Effects of Offshore Sampling and Testing on Undrained Soil Shear Strength

U.S. Implementation of LRFD for Earth Retaining Structures

Size and Scale Effects on the Shear Strength of Concrete Beams
This paper identifies and discusses the role of proper geometric scale of relevant parameters in the size effect in shear, particularly in terms of practical beam design. In the overall...

An Experimental Study on the Behaviour of Full-Scale Composite Steel Frames under Furnace Loading
In view of recent large fires in tall buildings, such as One Meridian Square (USA), East Tower Central Park (Venezuela), World Trade Center (USA) and Windsor Tower (Spain), there has been...

Load Resistance Factor Design
This chapter discusses the tabulation of load resistance factor design data in Microsoft Excel....

LRFD Compared to Working Strength Loads: Introduction
This chapter introduces the subject of load resistance factor design as compared to working strength loads....

LRFD Compared to Working Strength Loads
This chapter contains examples used to demonstrate the design of footings to resist seismic loads....

Side Resistance in Piles and Drilled Shafts (The Thirty-Fourth Karl Terzaghi Lecture)

Resistance Factors for Single Driven Piles from Experiments

New Shear Stud Provisions for Composite Beam Design
The 2005 American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 2005) will contain significant changes to the shear connector provisions for...

Large Scale Sediment Source Identification and Load Estimation Designed to Inform the TMDL Process

Strength Design in Aluminum
A Review of Three Codes
Prepared by the Task Committee on Strength Design in Aluminum of the Committee on Special Structures of the Committee on Metals of the Structural Engineering Institute of ASCE. ...

Structural Safety and Its Quality Assurance
Sponsored by Committee 9A/10 of the Council on Tall Buildings and Urban Habitat of the Structural Engineering Institute of ASCE. This report uses an...

Reaching for the Sky
Tapei 101—soon to open its doors as the world's tallest building—will resist devastating typhoons, earthquakes, and sway with an ingenious system of outrigger trusses, supercolumns,...

Members Subjected to Torsion Combined with Other Actions
The combination of torsion with bending and shear (T-M-V) in members with both transverse and longitudinal reinforcement is the most commonly encountered combination in practical cases....

Symbol of Strength
Shortly after the Oklahoma City bombing, the federal government decided to rebuild. The result is an architectural gem incorporating the latest advances in blast resistance and sustainable...

Stability and Loads
This chapter examines stability and loads. Topics include stability and lateral load resistance during construction; effective lengths of cantilever columns; effect on stability of frame...

The Pentagon Report
The findings of the building performance study conducted following the September 11, 2001, terrorist attack on the Pentagon have far-reaching implications for the engineering and building...

 

 

 

 

Return to search