Low-Gravity Experiments: Shear Testing Takes a Nose Dive
A major challenge to making celestial soil mechanics viable is to re-engineer the profession's toolkit to provide geotechnical solutions without the luxury of ex-situ and in-situ testing as we know them...
Optimized Drilled Shaft Design through Post-Grouting: Shorten That Shaft for Better Performance
Tip post-grouting is a technique used to inject, under pressure, a neat cement grout beneath the base of a drilled shaft. This method enhances or improves axial load-displacement performance by increasing...
Performance-Based Earthquake Engineering: What Can It Do for You?
There's been a lot of talk, and some confusion, lately about performance-based earthquake engineering (PBEE). Many geotechnical engineers wonder -- what is it, how does it differ from what I've been doing,...
Pipe Characteristics
Microtunneling pipe should meet the following general requirements: Circular shape with a flush outside surface (including at the joints); Strength sufficient to withstand both the installation...
Extreme Wave-Force Calculation Procedure for 20th Edition of API RP-2A
The paper describes the revised guideline design wave force calculation procedure approved for the 20th edition of the API-RP2A WSD and the first edition of the API-RP2A LRFD and contrasts...
A Simple Model to Predict Soil Resistance to Driving for Long Piles in Deepwater Normally Consolidated Clays
As the exploration and development for offshore oil and gas reserves moves into the deepwater environment of the continental slope, a good model is necessary to evaluate drivability of...
Shear and Interface Strength of Clay at Very Low Effective Stress
Thin-specimen direct shear (TSDS) tests were conducted to measure the shearing strength of kaolinite, and interface strengths between kaolinite and acrylic plastic and anodized aluminum,...
Axial Capacity of Steel Pipe Piles in Clay
Development of theories for the prediction of the axial compressive and tensile load capacities of driven piles is made difficult by a variety of factors, e.g., disturbance of the soil...
Application of Model Pile Tests to Axial Pile Design
Experiments conducted with instrumented model pile segment probes at Harvey and Empire, Louisiana are summarized and the observed behavior interpreted. Correlations are developed for the...
Reliability and Resilience — Essential Ingredients of Sustainable Geotechnics
Sustainability of a system is its ability to survive and retain its functionality over time. In very simple terms, sustainability deals with the capacities (resistances) and demands (loads)...
Increased Seismic Resistance of Highway Bridges Using Improved Bearing Design Concepts
Cyclic Response of Steel-Stud Framed Wall Panels
Resistance of Hardened Box-Type Structures
Limiting Tip and Side Resistance - Fact or Fallacy?
Ground Water Influences on Foundation Side Resistance
On the Evaluation of Static Soil Properties
Evaluation of Geotechnical Property Variability
Multiple Resistance Factor Design for Shallow Transmission Line Structure Foundations
Hydrodynamic Damping on Flexible Cylinders in Sheared Flow
Parallel Wire Resistance Wave Meter
Return to search