Working Platforms for Specialty Geo-Construction
A major cause of rigs toppling over is the state of the "working platform" that they must work from. A working platform is a layer of material, often compacted sand or gravel, placed over the subgrade,...
Becoming Greener with Green Sand: An Iron Castings Company Devises an Environmentally Friendly Liner System Reusing Foundry Byproduct
Metalcasting is one of the oldest methods of recycling�humans have a few millennia worth of experience with the technique�but today's industry still battles public preconceptions...
Summary, Conclusions, and Recommendations
Civil engineers have responsibilities for the planning, design, construction, operation and maintenance of physical infrastructures. These infrastructures include all types of buildings,...
Grid Pavement
Open grid pavements consist of concrete or plastic units with large surface openings filled with a permeable joint material, typically small aggregate (ASTM No. 8 or No. 89), sand, or...
Extreme Wave-Force Calculation Procedure for 20th Edition of API RP-2A
The paper describes the revised guideline design wave force calculation procedure approved for the 20th edition of the API-RP2A WSD and the first edition of the API-RP2A LRFD and contrasts...
Selected Coastal Engineering Papers of Robert L. Wiegel
Civil Engineering Classics
Sponsored by the Coastal Zone Management Committee of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This collection contains 54 papers and...
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Four
Prepared by the Subcommittee on Offshore Technology Conference Support of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Viral Fate and Transport Modeling under Salinity Impact
This research studied the impact of salinity on sorption and transport of MS-2 in saturated sand through one-dimensional column experiments. MS-2 was used as a surrogate to understand...
Effects of Impervious Area Estimation Methods on Simulated Peak Discharges
The variability of simulated flood discharges is evaluated using two methods for estimating impervious surfaces and common design methods in the Mission Creek watershed (31 sq km) located...
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Three
Prepared by the Subcommittee on Offshore Technology Conference Support of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Lessons Learned from the December 26, 2004 Sumatra Quake and Tsunami
On December 26, 2004, a devastating earthquake occurred off the western coast of Sumatra, Indonesia, creating seismic and tsunami waves felt by people who live around the Indian Ocean....
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Two
Prepared by the Program Committee, Offshore Technology Conference, of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Celerity: Wave Action
This chapter discusses the tabulation of wave action data in Microsoft Excel....
Impact of Chemically-Induced Clay Transport and Deposition on the Hydraulic Conductivity of a Natural Sand
The purpose of this paper is to understand in part the dynamic impact of surfactants on hydraulic conductivity for designing enhanced pump and treat operations. This paper has two aims:...
Berm Breakwaters?Design, Construction and Monitoring
The philosophy of the fieldwork of Berm breakwaters was applied in Iceland. A few case histories were described with emphasis on quarry investigations, design, construction and monitoring....
Comparison of Hydrodynamic Parameters for a Floating Breakwater
The U. S. Army Engineer Research and Development Center is in the process of developing a Rapidly Installed Breakwater System (RIBS) for use in Joint Logistics Over the Shore Operations...
Montioring and Modeling of Tandem Breakwater System at Hammond, IN
A tandem breakwater system was constructed in 1989-90 to provide protection for a large marina at Hammond, IN, at the south end of Lake Michigan. A five year monitoring program (1993-98),...
Advances in Buoy Technology for Wind/Wave Data Collection and Analysis
Considerable advances have been made recently to reduce the cost of gathering meteorological and oceanographic data from coastal waters, especially for meteorological and oceanographic...
St. George Habor?Berm Breakwater Construction Considerations
During the period 1984-1987 three berm breakwaters with a total length of approximately 800 meters were constructed at St. George Harbor on St. George Island in the Pribil of Chain of...
Larger Foraminifers as Contributors to Carbonate Beach Sands
Larger foraminifers are locally significant contributors to tropical carbonate sediments, particularly in the Indo-Pacific region. The two major factors influencing foraminiferal production...
Return to search