LRFD Compared to Working Strength Loads: Introduction
This chapter introduces the subject of load resistance factor design as compared to working strength loads....

LRFD Compared to Working Strength Loads
This chapter contains examples used to demonstrate the design of footings to resist seismic loads....

Strength Design in Aluminum
A Review of Three Codes
Prepared by the Task Committee on Strength Design in Aluminum of the Committee on Special Structures of the Committee on Metals of the Structural Engineering Institute of ASCE. ...

On the Inelastic Design of Steel I Girder Bridges
This paper documents the development of a relatively easy to use set of effective plastic moment expressions and compares the performance of these equations with a series of experimental...

Flexural Behavior of Slender Post-Tensioned Masonry Walls
The 2002 edition of the Masonry Standards Joint Committee (MSJC, 2002) design provisions for masonry structures includes a chapter on the design of post-tensioned masonry (PTM) walls with...

Torsion of Reinforced Concrete -A Historical Overview
The story of torsion of reinforced concrete must start with the French professor, C. L. Navier. In his landmark book (Navier, 1826) he rigorously derived the first rational theory for...

Overview of Structural Behavior of Members Subjected to Torsion
The torsion strength of concrete beams depends on many factors, such as the amount of reinforcement, the volumetric ratios of longitudinal and transverse steel bars, the concrete strength,...

Advances in Analytical Modeling of Torsional Members
The basic formula for calculating the torsional strength of reinforced concrete members was developed by Rausch (1929) using the space truss concept. Unfortunately, Rausch's equation may...

Evaluation of Anchor Wall Systems' Landmark Reinforced Soil Wall System
With T.C. Mirafi's Miragrid & Miratex Geogrid Reinforcement —Final Report
This report describes a HITEC evaluation designed to determine the basic capability and limitations of the Landmark/Mirafi System for use as a technically viable precast MSE retaining...

Use of Coal Combustion By-Products as Low-Permeability Liners for Manure Storage Facilities
This chapter presents an overview of the use of compacted flue gas desulfurization (FGD) material as a low-permeability liner. It discusses the engineering characteristics of FGD materials...

Wood and Wood-Based Materials: Current Status and Future of a Structural Material
Wood is one of the earliest construction materials, and the structural use of wood and wood-based materials continues to steadily increase. In fact, new wood-based materials continue to...

Use of Fiber Reinforced Polymer Composites as Reinforcing Material for Concrete
Although the potential of continuous fiber reinforced polymers (FRPs) was recognized more than 50 years ago, bottlenecks such as vulnerability to static fatigue, ultraviolet radiation,...

History of Hot Mix Asphalt Mixture Design in the United States
Asphalt has been used as a construction material from the earliest days of civilization, but though it has long been used as a waterproofing material in shipbuilding and hydraulics, its...

Impact of Chemically-Induced Clay Transport and Deposition on the Hydraulic Conductivity of a Natural Sand
The purpose of this paper is to understand in part the dynamic impact of surfactants on hydraulic conductivity for designing enhanced pump and treat operations. This paper has two aims:...

The Role of Pavement Mechanics in the Future of Pavement Design, Construction, Performance, and Management - Opening Address

Materials and Manufacturing Processes
This chapter introduces the basic materials used in the manufacturing of composite structures. It will help the line designer in understanding how the different elements of the fiber-matrix...

Performance-Based Criteria for FRP Products and Materials
In most ways, fiber-reinforced polymer (FRP) structures perform similar to wood and steel structures. There are, however, certain differences and these differences are described in this...

Loading Requirements for FRP Poles Utilized in other than Utility Line Applications

Evaluation of the Tricon Retained Soil Wall System
Prepared by the Highway Innovative Technology Evaluation Center, a CERF/IIEC Innovation Center. This report describes a HITEC evaluation designed to...

Evaluation of the Maccaferri Terramesh System Retaining Wall
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF/IIEC Innovation Center. This report describes a HITEC evaluation designed...

 

 

 

 

Return to search