Strength Design for Reinforced-Concrete Hydraulic Structures
Strength Design for Reinforced-Concrete Hydraulic Structures, a U.S. Army Corps of Engineers engineering manual, provides guidance for designing...

Guidelines for PC-Based Data Acquisition Systems for Hydraulic Engineering
Guidelines for PC-Based Data Acquisition Systems for Hydraulic Engineering reviews the state-of-the-art in personal computer-based data acquisition...

Reliability and Uncertainty Analyses in Hydraulic Design
Prepared by the Subcommittee on Uncertainty and Reliability Analyses in Design of Hydraulic Structures of the Technical Committee on Probabilistic Approaches to Hydraulics of ASCE. ...

Stability of Rock Armour Under Random Wave Attack: Performance of Non-Standard Rock Shapes and Gradings
Quarried rock is frequently used to protect coastal and shoreline structures against wave attack. Armour rock specifications generally exclude rock that is rounded or tabular, and gradings...

RCC for Rehabilitation of Dams in the USA-An Overview
The use of roller-compacted concrete (RCC) has rapidly become a powerful new tool in the USA for engineers involved with the rehabilitation of existing dams. Starting in 1980, RCC has...

Hydraulics of Stepped Spillways for RCC Dams and Dam Rehabilitations
Stepped spillways are natural extensions of roller-compacted concrete (RCC) placement techniques. Stepped spillways were first used with concrete dams, and designers are eager to use the...

Design of the Boney Falls RCC Emergency Spillway
The Boney Falls Emergency Spillway was designed as a mass roller compacted concrete structure. Alternative designs considered include a fuse plug, lowering the embankment and paving with...

Coastal Geomorphology and Sand Budgets Applied to Beach Nourishment
It is commonly assumed beach nourishment projects are more successful if applied over long distances of shoreline. Short projects tend to unravel at the ends as the bulge formed by the...

Beach Nourishment with Aragonite and Tuned Structures
The first full-scale use in the United States of imported aragonite sand for beach restoration was undertaken at Fisher Island, Florida, between December 1990 and April 1991. About 20,000...

Monitoring of the 1988 Boca Raton Beach Nourishment Project
During July and August of 1988, approximately 843,000 cm of sand was placed along a 2.3-km stretch of beach in Boca Raton, Florida. Post-cosntruction monitoring of the beach nourishment...

Mitigation of Harbor Caused Shore Erosion with Beach Nourishment Delayed Mitigation, St. Joseph Harbor, MI
St. Joseph Harbor MI. was the first Corps of Engineers Section 111 erosion-mitigation project to be built. Between 1 Jun 76 and 5 Aug 85, about 1,067,000 cy of fine sand was placed in...

Design of Protective Dunes at Dam Neck, Virginia
Dunes act as a primary coastal defense against inundation in the Netherlands and the Dutch Government has devoted considerable effort towards development of reliable procedures for the...

A Dual Approach to Low Frequency Energy Definition in a Small Craft Harbor
Low frequency wave energy in a small craft harbor is examined through comparison between a numerical model and a 3-dimensional physical model. A hybrid element steady state linear monochromatic...

Design, Construction, and Performance of a Baffled Breakwater
The Spud Point Marina breakwater is located within Bodega Harbor, a protected embayment on the northern California coast. Waves are attenuated by baffle panels hung between support piles....

57 Years of Coastal Engineering Practice at a Problem Inlet: Indian River Inlet, Delaware
This paper presents a review of Indian River Inlet's behavior in its natural state prior to jetty construction and summarizes the level of understanding of coastal processes and inlet-bay...

Use of Portable Simulator in Designing Channel Improvements for Port of Brownsville, Texas
The Port of Brownsville, located at the southernmost tip of Texas, serves as an import/export port for both southern Texas and northern Mexico. The proposed channel improvement project...

Dutch Experience on Design of Dikes and Revetments
The increased demand for reliable design methods for protecting structures has resulted in The Netherlands in preparing a set of design guidelines for design of dikes and revetments. The...

A Design Manual for Coastal Fluidization Systems
This paper summarizes a recently completed design manual on fluidization systems to manage sand in the coastal environment for sand bypassing at inlets and harbor mouths and for creating...

Coastal Engineering Design Codes in the Netherlands
Dutch research strategy on water defences and the resulting coastal and hydraulic engineering design codes (technical documents) are briefly overviewed. Special attention is paid to organizational...

Particle Analysis of Material Behavior?A Note on Continuum Assumptions
Continuum models of materials have dominated our approach to the analysis of material behavior. Recently a number of discrete particle methods have been proposed which offer a different...

 

 

 

 

Return to search