River Restored
After floods devastated the Big Thompson River area in northern Colorado in 2013, engineers worked to restore key reaches of the watershed. Their rehabilitation efforts featured channel grading, bank stabilization,...

ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering
he ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering will serve as a medium for dissemination of research findings, best practices and concerns, and for discussion...

Testing the New Locks (part of "A Greater Wonder")
The recently completed third set of locks at the Panama Canal incorporates several civil components and hydraulic design features that are intended to reduce routine maintenance and conserve water. For...

Hydrologic and Hydraulic Design Methods
Computational methods for hydrologic analysis, hydraulic functions, and treatment capacity of permeable pavements vary depending on the complexity of the design and level of detail in...

Estimation of Consolidation Properties of Clay from Field Observations
Analyses to obtain theoretical time-settlement curves for embankments typically make use of soil properties measured in the laboratory on small disturbed samples subject to strain rates...

Measurement of Hydraulic Conductivity of Partially Saturated Soils
Increased interest in protection of the environment has led to a need to be able to predict long-term movement of moisture, and contaminants, in the vicinity of shallow land disposal sites...

Performance of Suction Caissons in Sand and Clay
The use of suction caissons (suction piles) in marine environments has been increasing in the last decade. A suction caisson is a steel pipe with an open bottom and a closed top that is...

Smart Levees - Getting the Most out of Flood Barriers

Sand Bypassing at Santa Barbara, California

3-D Hydraulic Model of Waves Generated by Displacements

Dye-Vector Flow Visualization-Cooling Water Model

Design Wave (Including Scott-Wiegel Wave Spectrum Model)

Cooling by Ocean Water: Model/Field Comparison

Longshore Transport of Sand and Beach Nourishment

Artificial Beach Construction with Sand/Gravel Made by Crushing Rock

Seawalls, Seacliffs, Beachrock: What Beach Effects? Part 2

Waimea River Mouth to Kekaha Beach, Kauai, Hawaii: Two Distinctive Natural Sands

Grouting Methods
This chapter discusses common grouting methods used in underground applications in both soil and rock. Jet, compaction, permeation, and hydrofracture grouting methods are frequently used...

Rock Scour at Hydraulic Structures: A Practical Engineering Approach

Maximum Weighted Log-Likelihood Estimation for Parameterization Selection Uncertainty
Hydraulic conductivity identification remains a challenging inverse problem in groundwater modeling because of inherent non-uniqueness and lack of flexibility in parameterization methods....

 

 

 

 

Return to search