Reinforced Concrete Beam
This chapter discusses the tabulation of reinforced concrete beam data in Microsoft Excel....

Evaluation of the VERSA-LOK / Miragrid Reinforced Soil Wall System
Final Report
Prepared by the Highway Innovative Technology Evaluaton Center (HITEC), a service center of Civil Engineering Research Foundation. This evaluation...

BP Bridge at Millennium Park, Chicago
The structural engineering design and constructive aspects of a unique stainless steel-clad pedestrian crossing at the Millennium Park in Chicago are presented. The overall bridge form...

On the Inelastic Design of Steel I Girder Bridges
This paper documents the development of a relatively easy to use set of effective plastic moment expressions and compares the performance of these equations with a series of experimental...

New Shear Stud Provisions for Composite Beam Design
The 2005 American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 2005) will contain significant changes to the shear connector provisions for...

The New Tacoma Narrows Suspension Bridge Introductory Project Information
On September 25, 2002, Notice-to-Proceed for a design-build agreement was issued by the Washington State Department of Transportation (WSDOT), directing Tacoma Narrows Constructors (TNC),...

Zemmouri, Algeria, Mw 6.8 Earthquake of May 31, 2003
Prepared by the Earthquake Investigations Committee of the Technical Council of Lifeline Earthquake Engineering ASCE. This TCLEE Monograph summarizes...

Life-Cycle Environmental Accounting and Decision-Making for Bridge Structures
This presentation focuses on life-cycle environmental accounting and decision-making for bridge structures using the example of steel and steel-reinforced concrete....

Torsion of Reinforced Concrete -A Historical Overview
The story of torsion of reinforced concrete must start with the French professor, C. L. Navier. In his landmark book (Navier, 1826) he rigorously derived the first rational theory for...

Overview of Structural Behavior of Members Subjected to Torsion
The torsion strength of concrete beams depends on many factors, such as the amount of reinforcement, the volumetric ratios of longitudinal and transverse steel bars, the concrete strength,...

Advances in Analytical Modeling of Torsional Members
The basic formula for calculating the torsional strength of reinforced concrete members was developed by Rausch (1929) using the space truss concept. Unfortunately, Rausch's equation may...

Members Subjected to Torsion Combined with Other Actions
The combination of torsion with bending and shear (T-M-V) in members with both transverse and longitudinal reinforcement is the most commonly encountered combination in practical cases....

Detailing and Design Examples for Torsional Members
The nature of the internal force flow in a concrete member subject to torsion brings about both longitudinal and transverse force components. The resulting tension brought about by the...

Case Studies in Steel
An innovative project delivery system for structural steel buildings enables the structural engineer to provide complete structural design services on conventional contractor-led design/build...

Evaluation of the CON-ARCH reinforced Concrete Buried Arch System
Final Report
This report summarizes the evaluation of the Con-Arch culvert system marketed by Hunter Contracting, Co. of Tucson, Arizona. The evaluation consisted of computer analysis and field testing of two Con-Arch...

Use of Fiber Reinforced Polymer Composites as Reinforcing Material for Concrete
Although the potential of continuous fiber reinforced polymers (FRPs) was recognized more than 50 years ago, bottlenecks such as vulnerability to static fatigue, ultraviolet radiation,...

Atmospheric Corrosion Resistance of Structural Steels
The main objective of this paper is to provide engineers with data on thickness loss of structural steel members resulting from corrosion. To this end, the writers have collected atmospheric...

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review
A concise state-of-the-art survey of fiber-reinforced polymer (also known as fiber-reinforced plastic) composites for construction applications in civil engineering is presented. The paper...

Shell of Steel
To create a saddle-shaped bandstand in a newly developed park in St. Paul, Minnesota, engineers designed a glass-covered, stainless steel lattice grid that makes use of a unique system...

Performance-Based Criteria for FRP Products and Materials
In most ways, fiber-reinforced polymer (FRP) structures perform similar to wood and steel structures. There are, however, certain differences and these differences are described in this...

 

 

 

 

Return to search