Use of Computers for Soil and Rock Testing
The Bureau of Reclamation's central geotechnical laboratory in Denver, Colorado, routinely uses computers and associated electronic measurement devices for data acquisition,...

Analytical Solution for a Coupled Hydraulic and Subsidence Model

Pumping In and Pumping Out: Case Histories of Fluidized Sand Bypassing for Channels and Beachface Dewatering for Beaches
New technologies can change management of sand in coastal areas. Fluidization, pumping in additional water beyond the quicksand point, makes a 50:50 sand-water slurry that will flow down...

Suspended Sediment Concentrations in a Barred Nearshore Zone
Field observations of the suspended sediment concentrations in the inner nearshore zone are made with the use of a pump-sampling system to derive time-averaged profiles and with the use...

The Oceanside Experimental Sand Bypass—The Next Step
Following the completion and successful operation of the first phase of the Oceanside Sand Bypass, the next step in the development of the experiment has begun. The Phase I plant is not...

New Dredging Technology for Inlets and Beaches: Move Sand to the Pump
Conventional dredging for channel maintenance and 'mining' of offshore sand for beach restoration and renourishment 'moves the pump to the sand'....

Benefits and Applications of Modular Hydroelectric Pumped Storage
Hydroelectric pumped storage is the only proven and most efficient technology available for energy storage. It is used by utilities to provide peak and intermediate power and to optimize...

Rocky Mountain Project Power Tunnel Filling Test
The Rocky Mountain Project, a pumped storage development located in NW Georgia, is owned jointly by Oglethorpe Power Corporation and Georgia Power Company. Initial construction included...

Field Tests of a Lewiston Pump-Generating Unit
An extensive field test program was undertaken on a Lewiston Pump-Generating Plant (LPGP) unit at the Niagara Power Project, owned and operated by the New York Power Authority. The objective...

Cavitation Noise Investigation of a Pump-Turbine
The results from cavitation noise detection measurements on a 35 MW pump-turbine are presented. Detailed information about the cavitation noise is determined including three-dimensional...

Rocky Mountain Pump-Turbines and Related Mechanical Equipment
The Rocky Mountain powerplant will have three reversible, single stage, vertical shaft pump-turbine units, each having a maximum output of 321 MW generating and a maximum pumping capacity...

Vibration of Penstocks in Hydroelectric Installations
In many penstocks and pump discharge lines of turbines and pumps, pipe vibrations have been observed. Many of these installations have blade and vane arrangements other than the classic...

Turbines and Pump Turbines for Ultra High Heads
The paper describes the turbine development in Norway as background for high head turbine technology and shows a typical Norwegian high head Francis as an example. High head reversible...

Improving Well Hydraulics

Optimizing Ground Water Delivery Systems

Predicting Incipient Fluidization of Fine Sands in Unbounded Domains
Fluidization systems in the coastal environment consist of a water pumping system and a source pipe buried in or near a tidal inlet to maintain a channel or to aid in sand bypassing. If...

Type Curves for a Slug Test in an Infinitely or Semi-infinitely Thick Aquifer
Type curves are provided for a slug test in an infinitely or semi-infinitely thick aquifer, the latter with the single confining layer immediately above or immediately below the well....

Well and Formation Losses
For design projects in the groundwater area, a step-drawdown test is commonly used to investigate the properties of the well-aquifer systems. Higher well and formation losses are usually...

Aquifer Measurements at Different Scales
Multilevel slug test data from five wells in a confined, sandy aquifer were analyzed to obtain an estimate of the vertical variation of the horizontal hydraulic conductivity, K(z). Hydraulic...

Application of Tracer Tests in Groundwater Remediation Design
Recent advances in the area of field testing for the quantification of hydraulic conductivity have resulted in improved site characterization of aquifer hydraulics and greater reliability...

 

 

 

 

Return to search