Nonprestressed and Prestressed FRP Sheets as External Reinforcement of Wood Members
The paper presents a summary of an analytical and experimental investigation of a new form of wood construction involving external bonding of thin fiber reinforced plastic (FRP) sheets...
Shear Resistance Models for Concrete Bridges
Statistical models are developed for the shear resistance of concrete bridge girders. Two structural types are considered: reinforced concrete T-beams and prestressed concrete AASHTO girders....
Predicting Tower Guy Pretension Using a Neural Network
Behaviour of Prestressed Concrete End Blocks
This paper briefly reports on a series of experiments carried out on strip-loaded prestressed concrete end blocks. The results show that corresponding design methods presently used in...
A New Aramid Rod for the Reinforcement of Prestressed Concrete Structures
ARAPREE, a Non-Metallic Tendon: Performance and Design Requirements
A Prestressed Kevlar/FRP Structural System: Effects of Cable, Post and Main Member Stiffness
Computer-Based Interactive Design for Prestressed Concrete Structures
Prestressed concrete structures can provide a highly desirable solution for many structural applications because the designer gains control over several additional parameters as compared...
Prestressed Concrete Bridge Design and Optimization
The computer program described here analyzes simple span highway bridges for any AASHTO live load, generates girder and slab dead loads, performs the analyses for maximum moments and shears,...
Studies of Behavior and Computer Program on Curved Bridges
Performance of a Prestressed Rigid Frame During Removal of Column 6W from I93 in Boston, Massachusetts
The first phase of the suppression of Boston's Central Artery included the Early Viaduct Construction in the Central Artery North Area. This project required that Column 6W...
Modular-Prestressed Shoring System for Demolition
Two case histories are used to present the development and performance of a modular prestressed vertical shoring system to control deflections of existing structures during the demolition...
Testing and Evaluating Fiberglass, Graphite, and Steel Prestressing Cables for Pretensioned Beams
Test Results on Reinforced and Prestressed Ice
Fatigue Reliability of Prestressed Concrete Bridges
Experimental studies indicate that fatigue is a random phenomenon. Therefore, the approach is based on probabilistic methods. The fatigue life of the prestressed concrete girder is estimated...
Statistical Properties of Prestressed Concrete Beams in Shear
Monte Carlo simulations were performed on prestressed concrete rectangular and tee-section beams in shear produced by a single concentrated load at mid span. The truss analogy model was...
Reliability and Redundancy Assessment of Prestressed Truss Bridges
Methods for the assessment of the reliability and redundancy of post-tensioned trusses are suggested. The effect of tendon layout on the reliability and redundancy of post-tensioned trusses...
In-Situ Evaluation of 30-In. (762-mm) Diameter Prestressed Concrete Lined-Cylinder Pipeline
The results of an extensive investigation to evaluate the in-service condition and future serviceability of an existing lake water make-up pipeline are briefly described herein. The pipeline...
Combined Load Testing of Prestressed Concrete Cylinder Pipe
A series of combined load tests were run on prestressed concrete cylinder pipe in order to evaluate a proposed new method of design for pipe made to AWWA Standard C301. These tests involved...
Innovative Concept for Prestressed Pressure Pipe
A new design and manufacturing concept was developed by General Atomics for prestressed pressure pipe. With this new concept, patented in the U.S. and in the major industrialized nations,...
Return to search