Swedish Success
Constructing the Hoga Kusten Bridge in northern Sweden, which features the seventh-longest main span of any suspension bridge in the world, was a complex task made more difficult by the...
Recover Inorganic Solids from Obsolete Propellants
A feasible process was developed to recover inorganic solids (energetics and metallic fuel) from obsolete polyurethane-based propellants in order to solve their associated long-term disposal...
Rate-Dependent Plasticity Representation for Energy-Absorbing Materials
A three dimensional rate-dependent plasticity constitutive model is developed for rigid polyurethane foams. In the model, the material is decomposed into skeleton and solid matrix from...
Constitutive Modeling and Simulation of Energy Absorbing Polyurethane Foam Under Impact Loading
The compressive-stress strain response of polyurethane foam under uniaxial compressive impact loading has been studied. The development of a uniaxial constitutive model from strain rate...
Mechanical Response of Cellular Materials Used in Waste Shipping Containers
Material behavior of impact limiters such as aluminum honeycombs and polyurethane foams has been studied experimentally. Four densities of aluminum honeycombs were tested: 3, 8, 12, and...
Forensic Analysis of a Two-Component Joint Sealant Using FTIR-ATR
Fourier-Transform Infrared Spectroscopy using Attenuated Total Internal Reflectance (FTIR-ATR) was used to chemically identify joint sealants obtained from an airfield pavement joint which...
Development of a Constitutive Model for Impact Limiters
A constitutive model is being developed for 'impact limiter' materials such as aluminum honeycombs and polyurethane foams. Among other applications, these materials...
New Interior Lining for Welded and Riveted Penstocks
Pacific Gas and Electric Company (PG&E) has 73 hydroelectric power facilities installed throughout its distribution system. Each of these facilities has at least one penstock,...
The Use of Polyurethane Grouts and Grout Tubes
Most polyurethane grouts used for seepage control are one-component, and water activated. They are prepolymers of a polyisocyanate with a polyol. Some of the polyurethane grouts use an...
Planetary Base Inflatable Form Construction
The use of the inflatable form (IF) structure has been practiced in the concrete industry for more than a decade. This article proposes the use of a double-walled IF for the Phase I construction...
Brighter Future for Stay Cables
Corrosion problems on cable stayed bridges can be prevented, according to several engineers who responsed to Cables in Trouble, a Civil Engineering article that appeared in the April 1988...
Low Friction and Adfreeze Coatings
Low friction and adfreeze coatings have proven to be cost effective in reducing skin friction on icebreaker hulls. Of the two coatings acceptable for this service, the 100% polyurethanes...
Foam Grout Saves Tunnel
Pittsburgh's 81 year old Mt. Washington tunnel has been made safe for many more decades of light-rail transit use, with the use of foamed chemical grout. The job is the first...
Return to search