Energy Criterion for Load Duration Problem in Wood

Damage Zone Evolution During Fatigue Crack Propagation in Aramid And Glass Fiber Reinforced Laminates

Suitability of ER Method for Composite Materials Data

Time-Deflection Field Test of 120-cm Steel, Fiberglass, and Pretensioned Concrete Pipe

Dinorwig Power Station—The Successful Solution to Cavitation Problems at Dinorwig Power Plant with the aid of the Polymeric Coatings

Mechanics of Curved Fiber Bundles in Composites
Fiber undulations are inherent to manufacturing processes like braiding and filament-winding, and sometimes occur as defects in other composite structures. This paper summarizes the status...

FRP Box-Beams Under Long-Time Static and Fatigue Loading
This paper discusses experimental and analytical aspects of the long-time behavior of filament wound E-glass fiber reinforced epoxy-box-beams. Theoretical and experimental data are compared...

Local Buckling of Pultruded FRP Beams: Theory and Experiment
A continuing experimental and theoretical investigation of the local compression flange buckling of commercially produced pultruded fiber-reinforced plastic (FRP) beams is briefly described...

Testing of Concrete Curtain Wall Panels Reinforced with FRP Grids
The objective of this paper is to evaluate the suitability of Fiber Reinforced Plastic (FRP) grids for use as a structural; reinforcement in concrete curtain wall panels. This paper describes...

Innovations in Glulam Timber Bridge Design

Tests on Deep I-Shape Pultruded Beams

Thermal Qualification Testing of Efficient Neutron Shield Materials

Flow Capacity of Rehabilitated Sanitary Sewers

CDR - A Chemical Solution to a Mechanical Problem

Polymer Cement Composite - A Critical Review

New Directions for Cement-Based Materials

Treatment of Oil in Water Emulsions by Ceramic-Supported Polymeric Membranes
A novel membrane was developed by growing polymer chains from the surface of a porous ceramic support, resulting in a composite membrane which combines the mechanical properties of the...

Chelating Composite Membrane: Its Application in Selective Heavy-Metal Solid-Phase Separation
Selective removal of small amounts of heavy metals from the background of large amounts of innocuous sludge or slurry is a challenging separation problem. Conventional fixed-bed sorption...

Colloidal Fouling of Reverse Osmosis Membranes
Experiments on the fouling of thin film composite and cellulose acetate reverse osmosis membranes by aluminum oxide colloids are reported. Fouling was significant at high ionic strengths,...

Activated Carbon as a Catalyst for Polymerization of Phenolic Compounds
Previous studies by the principal investigator showed that the increase in the adsorptive capacity of activated carbon for phenolic compounds can be attributed to polymerization (oxidative...

 

 

 

 

Return to search