Standardized, Utility-DOE Compatible, Spent Fuel Storage-Transport Systems
Virginia Power has developed and licensed a facility for dry storage of spent nuclear fuel in metal spent fuel storage casks. The modifications to the design of these casks necessary for...
Concept Development of Small Cask to Large Cask Transfer Systems
Studies for EPRI have been performed by two contractors to develop conceptual designs for small cask to large cask transfers of spent fuel. From the work, two dry transfer concepts and...
Rancho Seco Spent Fuel Disposition Strategy
Spent fuel disposition options were studied for the shut down Rancho Seco plant. Based on comparative costs of various options, plant SAFSTOR intentions, reductions of spent fuel handling,...
Economic and Technical Advantages of High-Temperature Processes in High-Level Radioactive Waste Management
The estimated waste management costs incurred for the three principal waste forms produced by reprocessing spent fuel are compared from a theoretical economic standpoint. The cost of vitrifying...
Evaluation of Alternative MGDS Development Strategies
A methodology has been developed to explicitly and quantitatively evaluate acceptable alternative repository development strategies, in terms of the degree to which they are likely to...
Determination of Cost Effective Waste Management System Receipt Rates
A comprehensive logistics and cost analysis has been carried out to determine if there are potential benefits to the high-level waste management system for receipt rates other than the...
A Survey of Discrete Variable Optimization for Structural Design
Available methods for discrete variable structural optimization are reviewed. Methods are classified according to three categories: branch and bound, approximations using branch and bound,...
GIS Implementation on a Desktop Workstation
Geographic Information System (GIS) has now become an economically feasible reality. Technological progress allowed GIS capability at a very low cost. This progress greatly contributed...
Wetland Valuation Based Upon Multi-Purpose Performance Evaluation
Wetland protection and restoration have become a top priority in water management. A wide variety of benefits are ascribed to wetland protection, e.g., flood control, water quality improvement,...
Risk-Cost Analysis Under Uncertainty for Dredged Material Management
Fuzzy Composite Programming is used to conduct a risk-cost trade-off analysis under uncertainty for a simplified dredge material disposal problem. Uncertainties inherent in the components...
A Decision Support System for Dredging the Lower Mississippi River
The paper describes a decision support system proposed to aid short-term scheduling of maintenance dredging activities on the lower Mississippi River for the New Orleans District of the...
Summary of the National ASCE Task Committee on Costs-Benefits of Various Design Frequencies for Urban Drainage Systems and Flood Control
The National ASCE Task Committee on: 'COSTS-BENEFITS OF VARIOUS DESIGN FREQUENCIES FOR URBAN DRAINAGE SYSTEMS AND FLOOD CONTROL' recommends that public officials...
Applying Benefits-to-Costs Analysis for Stormwater Improvement Projects
Benefit-to-cost analyses provide a measure of evaluation for the justification, selection, and prioritization of stormwater improvement projects. Facing increased competition for tax dollars...
Optimizing Urban Ground Water Supply Systems
The cost of Pumping comprises a major part of total water operation and maintenance expenses. Most utilities attempt to keep these costs down. However, there are areas of study that may...
A Decision Support System for Water Supply Costing
Accurate cost estimates for water supply system expansions are an important component of the planning process. A spreadsheet-based cost estimating model called SWFCOST was developed as...
Poisson Instability of Laminated Composite Plates
The paper considers the uniaxial buckling of rectangular, anisotropic composite laminates with in-plane restrained unloaded edges where Poisson's effect is predominant to...
A Community-Focused Routing and Siting Model for Hazardous Materials and Wastes
A model is presented that shippers, carriers and policy-makers can use to analyze routing problems for hazardous materials or routing-and-siting problems for wastes. Unlike many other...
Surviving the Storm: Building Codes and the Reduction of Hurricane Damage
The link between adequate building codes, enforcement, and the level of damage experienced in major hurricanes was examined in a 1989 study by AIRAC, a public policy research group sponsored...
Radical Environmentalism, The New Approach: The Removal of Oil as a Primary Goal of Oil Spill Clean Up
In this paper the author examines the alternative methods of abating a catastrophic oil spill and compares these methods to the controlled burning of an oil spill using a fire-resistant...
Views of Environmental Issues Among Port Managers
Prior to the environmental movement, port operations were regulated, but clearly not as much as they are today. This study examines the impact of environmental regulation from the perspective...
Return to search