Multiplicity (Available only in the Geoenvironmental Special Issue)
When it comes to tracking groundwater contaminant plumes, single completion monitoring wells are the standard choice, but they aren't the only one. After four years of trying...

Hydraulic Fracturing Advances (Available Only in Geoenvironmental Special Issue)
Removing contaminants trapped in clays and nonpermeable soils can be difficult if not impossible with traditional extraction methods. A look at four hydraulic fracturing case studies shows...

Comparison of Stochastic Programming and Robust Optimization Models for Groundwater Plume Containment
Stochastic optimization models for containing a groundwater contaminant plume through the installation and operation of pumping wells are developed. Two related formulations are presented?stochastic...

Regional Groundwater Management with Health Risk Assessment
A regional groundwater system may have several areas which are contaminated with organic chemicals. In general, the objective of groundwater management is to supply the demand for water...

Comparison of Near-Field Dilutions Derived from In Situ Measurements and Simulated Dilutions at the Sand Island Sewage Outfall Plume, HI
Near-field dilutions of the Sand Island Treatment Plant (SITP) wastewater plume were derived from salinity measurements made at the sewage outfall between Sept. 25?Oct. 1, 1994, a period...

Near Field Modeling
Results of near field modeling of the wastefield formed by the Sand Island, Honolulu, ocean sewage outfall are presented. Over 20,000 simulations were run with the mathematical model RSB...

Cleanup Solution--Conflict Resolution
Distrust and misinformation often prevent timely resolution of ground-water contamination problems. In Toms River, N.J., engineers used a computer-generated model of the cleanup site in...

Modeling of Deep Water Outfall Plumes in the East Australian Coastal Ocean
The paper reports on the modeling study of deep water outfall plumes in the east Australian coastal ocean. The primary aims of the modeling were to provide estimates of plume condition...

How Many Observation Wells Does it Take to Find a Groundwater Contamination Plume?
A Bayesian data worth framework is developed to balance the benefits and costs of data collection. In addition to Bayesian decision analysis, tools from Monte Carlo simulation, numerical...

Fate/Transport Modeling and Remediation of Contaminated Plume at Vance Airforce Base
Air Training Command (ATC) at Vance Air Force Base (VAFB) is responsible for implementing the Installation Restoration Program (IRP) according to the Comprehensive Environmental Response,...

Modeling Ecological Impacts of Destratification
Artificial destratification has long been advocated as a means of improving water quality in lakes and reservoirs. The results have been varied with examples of both water quality improvement...

Smoke Plumes From In Situ Burning of Oil Spills
Mesoscale pool fire experiments with effective diameters up to 17.2 m were conducted to obtain data on the characteristics of burning crude oil on water. These experiments showed that...

A Mathematical Model for Predicting the Motion of Polluting Surface Plumes Due to Drift Currents
The paper analyzes the problem of displacement from the offshore to the nearshore of a polluting surface plume, subject to advection generated by wind-waves and wind-currents. After a...

Investigation of Chloroform Plumes in a Porous Media
A sand box model was used in the laboratory to study the development and stability of the contaminant plume with respect to space and time. Steady, uniform flow velocities were established...

Optimal Contaminant Plume Management with US/WELLS
A micro-computer based software package developed at Utah State University for computing optimal pumping strategies for well systems (US/WELLS) is demonstrated. US/WELLS is used to determine...

Simulation of Buoyant, Miscible Liquid Plumes in Heterogeneous Aquifers
Laboratory experiments have been conducted in a sand tank with a single heterogeneity into which NaNO3 is continuously injected. From samples along, across and over the depth of the tank...

Observations of Artificial Destratification
Artificial destratification using bubble plumes is one means whereby low dissolved oxygen in the hypolimnion of lakes and reservoirs may be averted. Temperature and DO were measured at...

Fluid Mechanics Aspects of Ocean Outfalls
Prediction of the environmental effects of ocean outfalls requires understanding of some complex fluid mechanical phenomena. These include the dynamics of merging plumes in flowing, density-stratified...

Similarity Solutions of Starting Jets and Starting Plumes
Similarity solutions of the starting jets and the starting plumes are obtained using a one dimensional model based on the top-hat profiles and the symmetry assumption for the velocity...

An Experimental Model Using a Graphical User Interface
This paper describes a program named Plume which runs on a microcomputer. The intended function of the program is to enhance an investigator's understanding of the estuarine environment...

 

 

 

 

Return to search