Design of Shoreline Protection Measures : The Importance of Geotechnical Engineering in Waterfront Design
Over the past decade, there�s been an increased realization of the need to better protect our shorelines, particularly in urban environments along coastlines that have already been impacted by storm surge...
Delegate, Network, and Ask for What You Want
Justin Siegrist, P.E., M.ASCE, is the hydraulic modeling lead in the Cincinnati office of Wade Trim. His advice to young engineers: delegate, network, and ask for what you want....
Design of Submarine Pipelines Against Upheaval Buckling
This paper describes part of a comprehensive joint-industry project on upheaval buckling. It develops a semi-empirical simplified design method and detailed design methods based on a new numerical analysis,...
Grid Pavement
Open grid pavements consist of concrete or plastic units with large surface openings filled with a permeable joint material, typically small aggregate (ASTM No. 8 or No. 89), sand, or...
Hydrologic and Hydraulic Design Methods
Computational methods for hydrologic analysis, hydraulic functions, and treatment capacity of permeable pavements vary depending on the complexity of the design and level of detail in...
Scope
This standard guideline covers planning, design, pipe materials, and construction of microtunneling. The term microtunneling is defined as a trenchless construction method for installing...
Project Layout
Microtunneling projects should be laid out with attention to the benefits and constraints unique to this construction process. The following recommendations address some of these concerns:...
Pipe Characteristics
Microtunneling pipe should meet the following general requirements: Circular shape with a flush outside surface (including at the joints); Strength sufficient to withstand both the installation...
Field Aspects
As soon as practical after their arrival at the project site, all pipes, fittings, and appurtenances should be thoroughly checked for compliance with the contract documents and accepted...
Performance Limits for Deepwater Pipelines
This paper highlights the differences between onshore and offshore pipeline design. It then summarizes the results of combined external pressure, tension, and bending testing on full scale...
Estimation of Consolidation Properties of Clay from Field Observations
Analyses to obtain theoretical time-settlement curves for embankments typically make use of soil properties measured in the laboratory on small disturbed samples subject to strain rates...
Measurement of Hydraulic Conductivity of Partially Saturated Soils
Increased interest in protection of the environment has led to a need to be able to predict long-term movement of moisture, and contaminants, in the vicinity of shallow land disposal sites...
Sinkhole Investigation and Grouting: Novel Recommendations for a Pipeline Right-of-Way
In 2009, numerous sinkholes developed within and adjacent to a 400-ft-long section of high-pressure, petroleum pipeline right-of-way that crosses under a local creek in Plymouth Meeting,...
Journal of Pipeline Systems Engineering and Practice
The Journal of Pipeline Systems Engineering and Practice is a professional, authoritative technical resource that reports on a broad range of topics pertaining to the planning, engineering, design, construction,...
Grouting Methods
This chapter discusses common grouting methods used in underground applications in both soil and rock. Jet, compaction, permeation, and hydrofracture grouting methods are frequently used...
Maximum Weighted Log-Likelihood Estimation for Parameterization Selection Uncertainty
Hydraulic conductivity identification remains a challenging inverse problem in groundwater modeling because of inherent non-uniqueness and lack of flexibility in parameterization methods....
Groundwater Transport Modeling Using Fuzzy Sets and Fuzzy Logic
Modeling of groundwater flow and transport is inherently uncertain. The predictive capability of the model depends upon both the quantity and quality of hydrogeologic data. The introduction...
Viral Fate and Transport Modeling under Salinity Impact
This research studied the impact of salinity on sorption and transport of MS-2 in saturated sand through one-dimensional column experiments. MS-2 was used as a surrogate to understand...
Effects of Impervious Area Estimation Methods on Simulated Peak Discharges
The variability of simulated flood discharges is evaluated using two methods for estimating impervious surfaces and common design methods in the Mission Creek watershed (31 sq km) located...
2008 Civil Engineering Industry Buyer' Guide
A Special Supplement to Civil Engineering Magazine
This guide covers the following topics: Construction materials; Geotechnical and environmental; Information technology; Pipelines, sewers, and accessories; Professional and professional...
Return to search