Pipe Characteristics
Microtunneling pipe should meet the following general requirements: Circular shape with a flush outside surface (including at the joints); Strength sufficient to withstand both the installation...
Pipe Design
The pipes and joints, once installed, must be capable of safely withstanding, for the project design life, all in-use service loads, including those associated with the following factors:...
Field Aspects
As soon as practical after their arrival at the project site, all pipes, fittings, and appurtenances should be thoroughly checked for compliance with the contract documents and accepted...
Axial Load Capacity of Pipe Piles in Sands
The axial load capacity of driven, open-ended, steel pipe piles in cohesionless soils, is often estimated using a method such as the American Petroleum Institute Recommended Practice 2A...
Behaviour of Open-Ended Pipe Piles in Sand During Installation and Loading
An experimental study was performed to investigate the physical processes which influence the axial load capacities of open-ended steel pipe piles in sand. A double-walled pipe pile was...
Axial Capacity of Steel Pipe Piles in Clay
Development of theories for the prediction of the axial compressive and tensile load capacities of driven piles is made difficult by a variety of factors, e.g., disturbance of the soil...
Enhanced Detection and Mapping of Buried Utilities—A Sustainability Perspective
The social and environmental impacts and benefits of projects make up the triple bottom line that represents a modern view of sustainable project development. Rather than considering only...
The Measurement of Wave Heights by Means of a Float in an Open-End Pipe
Fast-Track Repairs of Critical Levee Erosion Sites
Existing Sewer Evaluation and Rehabilitation
Fully revised and updated, this authoritative volume offers the most comprehensive information available on maintenance, repair, rehabilitation, and replacement of existing sewers. This...
2008 Civil Engineering Industry Buyer' Guide
A Special Supplement to Civil Engineering Magazine
This guide covers the following topics: Construction materials; Geotechnical and environmental; Information technology; Pipelines, sewers, and accessories; Professional and professional...
Discussion of Time for Development of Internal Erosion and Piping in Embankment Dams by Robin Fell, Chi Fai Wan, John Cyganiewicz, and Mark Foster
(Originally published in
Book Review:
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years
Prepared by the Subcommittee on Offshore Technology Conference Support of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Leakage Control—Finding a New Resource from the Existing One
It is estimated that by the year 2005, one person in two will have an insufficient supply of one of the world's most precious elements: water. Worse still, it is predicted that this shortage...
Rate of Under-Registration Due to Failures of Large Meters
Leaks and meter under registrations are suspected as primary components of unaccounted-for water in Korea. In 2001, national unaccounted-for-water rate is reported as 26.6%. More than...
Replacing a Dying Water Infrastructure
The water infrastructure in the United States will soon need massive repairs. Pipes are leaking, and most pipes are near the end of their life cycles. Tens of thousands of sewer overflows...
CMOM in Fairfax County, Virginia
Water and Wastewater Seismic Vulnerability Assessment and Loss Mitigation Overview
The basic steps of a loss mitigation program for water and wastewater systems are briefly described in this section. These steps demonstrate how the checklists may be used to compliment...
Freight Pipelines: Past, Present and Future
Freight pipelines are a set of time-honored methods to transport solids by underground pipelines, and the technology is improving. However, for intercity and interstate freight transport...
Return to search