Full-Scale Testing of Developed Hybrid Foundation

Micropiles on a Mountainside

Ultimate Bearing Capacity of Small Diameter Steel Pipe Piles

Strength Increase in Soft Clay Surrounding Jet Grouted Soil Mass

Fundamental Laboratory Investigation of Compensation Grouting in Clay

Evaluation of Axial Compression Behavior of Micropiles

Behavior of Soft Singapore Marine Clay Treated with Cement

Statnamic Tests for Six Long Rock Socketed Shafts

Assessment of SIMBATĀ® Dynamic Pile Tests

Evaluating Axial Drilled Shaft Response by Seismic Cone

Liquefaction Mitigation at JFK Airport Using Dynamic Compaction

Use of Engineering Geophysics to Investigate a Site for a Bridge Foundation

Laterally Loaded Pile Group Effects and P-Y Multipliers

Design Analysis & Field Verification of Alameda Corridor Retaining Walls

Mini-Pile Case Histories and a Tensile Load Test on an Instrumented Mini-Pile

Reducing Settlement Risks in Residual Piedmont Soils Using Rammed Aggregate Pier Elements

Seismic Design of Highway Bridges: Recommended Specifications
Under the AASHTO-sponsored National Cooperative Highway Research Program (NCHRP), a joint venture of the Applied Technology Council and the Multidisciplinary Center for Earthquake Engineering...

Maintenance of Diaphragm-Girder Connections
Fatigue cracking at diaphragm-girder connections and at similar connections of cross-frames and floorbeams have been common in steel highway bridges for the past 20 or 30 years. Fatigue...

A Framework for Performance-Based Seismic Design
The following probabilistic framework for seismic performance assessment is presented as an effective foundation for the development of performance-based guidelines. It suggests a generic...

Effect of Column-to-Beam Strength Ratio on Seismic Performance of RC Moment Frames
Reinforced concrete (RC) moment frames are often used in building applications. During strong earthquake excitations, such buildings have been subject to soft-story or column sidesway...

 

 

 

 

Return to search