Building Code Requirements and Specification for Masonry Structures
Containing Building Code Requirements for Masonry Structures (TMS 402-11/ACI 530-11/ASCE 5-11), and Specification for Masonry Structures TMS 402-11/ACI 530-11/ASCE 6-11), and Companion Commentaries
Building Code Requirements and Specification for Masonry Structures contains two standards and their commentaries: Building Code Requirements for Masonry Structures (TMS 402-11/ACI 530-11/ASCE...

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Five
Prepared by the Program Committee, Offshore Technology Conference, of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Minimum Design Loads for Buildings and Other Structures
Minimum Design Loads for Buildings and Other Structures provides requirements for general structural design and includes means for determining...

U.S. Implementation of LRFD for Earth Retaining Structures

What's Shaking in Seismic Design of Earth Retaining Structures?

The Importance of Filters in Bridge Scour Countermeasure Design

Performance-Based Design Method (PBDM)
This chapter discusses the performance-based design method (PBDM). Topics include performance objectives; recommended analysis methods; modeling guidance; preliminary proportioning; acceptance...

Designing for Potential Mine Subsidence at a Disposal Facility in Appalachia

The Evolution of Geotechnical Inputs in Highway Pavement Design

Application of Unsaturated Soil Mechanics in Pavement Subgrade Design

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Four
Prepared by the Subcommittee on Offshore Technology Conference Support of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Watershed-Based Permitting — A Myth or Reality?
The United States Environmental Protection Agency has promulgated the Total Maximum Daily Load process to achieve the goals of the Clean Water Act. The TMDL processis applied to water...

Enhancing the Solution of Large Monitoring Network Design Problems Using a New Epsilon-Dominance Hierarchical Bayesian Optimization Algorithm
Designing long-term monitoring (LTM) networks for contaminated groundwater is a challenging problem that has long been recognized to suffer from the curse of dimensionality. LTM design...

Effects of Impervious Area Estimation Methods on Simulated Peak Discharges
The variability of simulated flood discharges is evaluated using two methods for estimating impervious surfaces and common design methods in the Mission Creek watershed (31 sq km) located...

Innovative Methods Used in the Design and Construction of the New Tacoma Narrows Bridge
On September 25, 2002, Notice-to-Proceed for a Design/Build Agreement was issued by the Washington State Department of Transportation (WSDOT), directing Tacoma Narrows Constructors (TNC)...

Current Programs in American Post-Secondary Wood Design Education
Wood engineering has been a requirement in civil/structural engineering education curricula forcenturies. In 1990, a comprehensive survey was conducted of wood engineering educationprograms...

The Role of Aesthetics in Bridge Design
The role of aesthetics in current bridge design practice varies widely. Many bridgeprojects in the United States are developed without including aesthetics as one of theproject goals....

Design-Build Contract Complexities
There are many approaches or options that an owner may pursue in acquiring facilities. Depending on the owner's objectives, the DB project approach may offer unique benefits,...

Project Definition and Conceptual Design
In order to select a DB contractor, the owner must define its requirements for project implementation and for the completed project. These requirements are typically incorporated into...

General Terms and Conditions
DB commercial contract terms can differ from conventional design-bid-build project terms, depending primarily on the owner's objectives, the level of risk that is to be assigned...

 

 

 

 

Return to search