Two Basic Concepts in Offshore Engineering
Two concepts are developed which lead to an improved understanding of the characteristics of the wave forces that act on deep-water, jacket-type offshore structures. The first concept...
3D Frequency Domain Analysis of Offshore Structures
This paper reports the application of three-dimensional (3D) frequency domain computational tools to the dynamic analysis of offshore structure systems. Previous applications of 3D frequency...
The Transport and Fate of Drilling Muds
The disposal of drilling muds from offshore oil platforms is of concern because of the potential effects of pollution from these muds. Both drilling muds and fine-grained bottom sediments...
Linearisation and Offshore Fatigue Reliability
In determining the force effects due to wave action on offshore structures it is conventional to use an equivalent linearisation to convert wave velocities to forces via Morison's equation....
A Unified Simulation Approach to Structural System Reliability Analysis
To determine accurate estimates for the system reliability of large complex structures requires considerable computation; unless the problem is assessed in an efficient manner the analysis...
Offshore Pile System Reliability
The existing design methodology for offshore pile foundations is evaluated relative to the ultimate performance of the foundation system using reliability techniques and data from three...
TLP Fatigue Due to Second-Order Springing
For offhsore oil production in water depths beyond 300-350 m, the tension leg platform (TLP) has become an increasingly popular design concept. The TLP is a floating structure with excess...
A Non-Gaussian Fatigue Model for Offshore Structures
Fatigue damage accumulation in members of offshore structures can be affected by various aspects of the non-Gaussian response stress time history induced by the nonlinear/non-Gaussian...
Pre-Compression of Concrete Breasting Dolphins Solves Construction Problem
A roll-on/roll-off ferry terminal was built in Quincy, Massachusetts in 1989 as part of a marine transportation system to support construction of the sewage treatment facilities proposed...
Environmental Effects of Beaufort Sea Causeways
Two gravel-fill causeways have been constructed into the shallow nearshore Beaufort sea on the north coast of Alaska for the development of petroleum reservoirs. These long (4-8 km) structures...
Construction on Wisconsin's Lake Michigan Coast
This paper provides a preliminary evaluation of a set of 100 residential properties along Wisconsin's Lake Michigan coast; an examination of the vulnerability of coastal homes and adequacy...
Upper Bound Limit Analysis of Deep Skirt Structures' Foundations
A solution to the problem of determining the bearing capacity of an embedded footing (foundation) subjected to arbitrary loading is being presented herein. It is primarily intended for...
Design of Tension Leg Platforms: A Knowledge Based Approach
Tension leg platforms (TLPs) are floating compliant platforms designed for deep water offshore hydrocarbon production. Only a few TLPs have actually been built, but others are currently...
Composites for Offshore Applications: A Multidisciplinary Education Program for the Marine Industry
Composites are increasingly being considered for offshore and other marine structural applications. Polymeric matrix composites reinforced with glass, carbon, and aramids offer substantial...
A Simple Method to Compute Wave Loads on a TLP
In this paper, analytic diffraction (Linton and Evans, 1990) and radiation (Kim, 1992) solutions for arrays of bottom-mounted vertical circular cylinders are used to compute hydrodynamic...
Civil Engineering in the Oceans V
This proceedings is a collection of technical papers presented at Civil Engineering in the Oceans V (CEO V) specialty conference held at College Station, Texas on November 2-5, 1992. Initiated...
Dynamic Response of Piles in Offshore Platforms
Some Questions on Fracture Mechanics of Ice and Ice Covers
Investigation of natural processes of deformation and fracture of ice covers, and processes of its interaction with icebreaker or ice-resistant structures requires as a rule considerations...
Effective Pressures Measured During Indentation Tests in Freshwater Ice
Indentation tests were conducted by pushing flat, vertical indentors of two different widths (50 and 100 mm) against the edges of floating, freshwater ice at different velocities (0.6-150...
Application of Ice/Structure Interaction Concepts to a Real Time Ice Risk Assessment Computer Model
The successful and safe operation of an Arctic offshore exploration structure greatly depends on the implementation of alerts procedures. In order to assess alerts levels, a computer model...
Return to search