Performance Evaluation of Offshore Breakwaters a Field and Computational Study
Performance of Offshore Platforms in Hurricane Andrew
New Approaches for Determination of Rock and Rock Mass Properties at Dredging Sites
Probability of Severe Hurricanes Across the Gulf of Mexico
King Harbor Mole Repair Redondo Beach, California
The Tip Displacement of Drilled Shafts in Sands
The design load of large diameter drilled shafts is determined so that the settlements do not exceed the values associated with the ultimate and serviceability limit states. Based on the...
Wave Runup on and Wave Reflection from Coastal Structures
Wave runup and wave reflection are two of the most important, easily quantifiable variables that influence the design of coastal structures. Unfortunately there are very few comprehensive...
Technical Note: STC-40 Shotcrete Adhesion In Situ Tester
It is essential that the shotcrete when reinforcing the rock mass achieves a good adhesive bond to the rock surface. The strength of that bond can be controlled by pull out testing either...
The Effect of Nonlinear Drag PSD on Fatigue of Compliant Offshore Structures
Structural fatigue damage induced by random ocean wave loading on a compliant type of offshore structure is considered. The nonlinear wave force is modeled by the Morison equation and...
Fatigue of Floating Offshore Structures: Modelling Uncertainty in Hydrodynamics and Fatigue Properties
For floating offshore structures such as tension leg platforms (TLPs), one form of loading uncertainty is due to nonlinear diffraction forces, which can excite lightly damped vertical...
Time Variant Reliability Under Environmental Loads
Time variant reliability with deteriorating resistance under a stochastic load process is considered. An outcrossing formulation for fatigue degradation is presented, and a simple and...
Ultrafine Cement Tests and Drilling Warm Springs Dam
Ultrafine cement was chosen by the Corps of Engineers for tertiary grouting the Warm Springs Dam because of its ultrafine particle size, low settlement, medium viscosity and longevity....
A Review of Drilling and Grouting Methods for Existing Embankment Dams
With the increasing emphasis being placed on dam rehabilitation and repair, more dam engineers are faced with the need to interface with drilling and grouting specialists. Regretfully,...
Recent Developments in Stochastic Modeling and Upscaling of Hydrologic Properties in Tuff
A set of detailed geostatistical simulations of porosity has been produced for a layered stratigraphic sequence of welded and non-welded volcanic tuffs at Yucca Mountain, Nevada. The simulations...
Calcite Deposits in Fractures at Yucca Mountain, Nevada
Calcite is one of the latest-formed minerals within fractures at Yucca Mountain. Petrographic and chemical studies of these calcites have the potential, in conjunction with fluid-inclusion...
New Wells Safeguard Scenic Tahoe
Surface water for drinking and for snow-making is becoming scarce in the Lake Tahoe region, along the California and Nevada border. New Environmental Protection regulations regarding surface...
Energy Facility Siting in Coastal Zones
Siting constraints to the development of coastal energy facilities may lengthen or complicate the siting process. These constraints have evolved over the history of coastal energy facilities....
Environmental Compliance and Offshore Oil and Gas Exploration and Production
The economic impacts of multiple environmental regulations of offshore oil and gas exploration and production are examined using an integrated, investment-production-regulatory model developed...
Modern Air Pollution Reduction Technology on Platforms in the Pacific OCS
The Pacific Outer Continental Shelf (OCS) along the California coast line has the most sophisticated air pollution reduction technologies implemented in the world. This paper describes...
The Whole Picture: Federal Statutory and Regulatory Authorities Which Govern Oil and Gas Activities on the Alaskan Outer Continental Shelf
Oil and gas activities conducted on the Alaska Outer Continental Shelf (OCS) are subject to multiple Federal laws which result in safe operations and environmental protection. Lessees...
Return to search