Seismic Performance of a Deep Soil Mixing Grid: A Magnitude 7.1 Load Test at the Port of Alaska
The Port of Alaska in Anchorage (Port) has embarked on a multiphase modernization program that includes the development of a new petroleum and cement terminal (PCT) berth. The berth consists of a pile-supported...

Loading, Geometry, and Analysis
This Standard applies to latticed steel transmission structures. These structures shall be either self-supporting or guyed. They consist of hot-rolled or cold-formed prismatic members...

A Simple Model to Predict Soil Resistance to Driving for Long Piles in Deepwater Normally Consolidated Clays
As the exploration and development for offshore oil and gas reserves moves into the deepwater environment of the continental slope, a good model is necessary to evaluate drivability of...

Axial Load Capacity of Pipe Piles in Sands
The axial load capacity of driven, open-ended, steel pipe piles in cohesionless soils, is often estimated using a method such as the American Petroleum Institute Recommended Practice 2A...

Behaviour of Open-Ended Pipe Piles in Sand During Installation and Loading
An experimental study was performed to investigate the physical processes which influence the axial load capacities of open-ended steel pipe piles in sand. A double-walled pipe pile was...

Calculated Examples of Long-Span Bridge Response to Wind

Wind Loading and Response of a High-Rise Building

Dynamic Response of Laterally-Loaded Piles in Centrifuge

Increased Seismic Resistance of Highway Bridges Using Improved Bearing Design Concepts

Wind Damage in Hurricane Frederic

Cyclic Response of Steel-Stud Framed Wall Panels

Resistance of Hardened Box-Type Structures

Dynamics of Low-Profile Ship Loading Container Cranes

Limiting Tip and Side Resistance - Fact or Fallacy?

Ground Water Influences on Foundation Side Resistance

On the Interpretation of Drilled Foundation Load Test Results

Multiple Resistance Factor Design for Shallow Transmission Line Structure Foundations

Determining the True Distributions of Load in Instrumented Piles

Test Loading of Piles and New Proof Testing Procedure

The Development of Allowable Fatigue Stresses in API RP2A

 

 

 

 

Return to search