Physical Hydraulic Modeling for Construction of New York State Dam Hydroelectric Project
The New York State Dam is located on the Mohawk River near its confluence with the Hudson River. Downstream from the dam, the river flow is divided into four main channels as the water...
Some Unusual Vibrations in Hydro Machinery
Most hydro machinery engineers have read the textbook cases of self-exited and flow induced vibrations. Usually such textbook vibrations are only found in the text book! In the real world,...
Three-Dimensional Velocity Distribution at Open-Channel Diversions
A study is underway to develop an improved understanding of the 3-D flow pattern at 90? diversions. The main goal is to explain, via the velocity distribution, the behavior of sediment...
Temperature Rise, Bank Erosion, and Jet Velocity Effects of Submerged Multiport Diffusers in an Estuary
Temperature distributions, potential bank erosion, and jet velocity and trajectory of submerged multiport diffusers were predicted as part of the permitting process for an fossil fuel...
Design of a Stratified Cooling Channel
Cooling ponds are used for managing waste heat discharges. Cooling ponds are, however, expensive to construct and operate. A cooling channel is studied as an alternative means of managing...
Modelling Longitudinal Temperature Distribution in TVA Reservoir System
A one-dimensional model has been developed for computation of water temperature in the TVA reservoir system. The model has been successfully used in evaluating the impact of incremental...
Spatially Varying Velocity Distribution in Non-uniform Open Channel Flow
The spatial variation of velocity distribution in non-uniform flows were studied, within the framework of a velocity distribution model derived by a probabilistic formulation and entropy-maximization....
Chesapeake Bay Data Set for Three-Dimensional Hydrodynamic Model Verification
A comprehensive data set representing September 1983 conditions on the Chesapeake Bay has been assembled and is proposed as a possible data set for inclusion in the work of the ASCE Task...
The Dilemma of Measuring Small Pressure Changes in a Settling Tube
A compact settling tube was developed to determine fall-velocity and particle-size frequency distributions and specific gravities of sand-range sediment samples by means of direct measurements...
Return Velocities Induced by Shallow-Draft Navigation
Return velocities are caused by the displacement effects of vessels as they travel in navigation channels. Numerous return velocity equations have been developed for relatively small channels...
Turbulence and Reynolds Stress Distribution in a Natural River
Turbulence characteristics of ambient flow velocities and their comparison with those generated by the movement of barge traffic within the channel border area in a navigation waterway...
Uncertainty Quantification in Water Distribution Parameter Estimation
Calibration for water distribution system model parameters is usually undertaken with a minimal amount of field measurements so additional pseudomeasurements are assumed. Both the actual...
Measurement of Wave-Induced Turbulent Flow Structures Using Digital Image Sequence Analysis
The turbulent flow in water close to the wavy wind-stressed water surface has been examined quantitatively in a large circular wind-water tunnel with a flow visualization method using...
Wavelets and Air-Sea Transfer
Newly acquired insight into the mechanism of air-sea momentum transfer has also resolved some long-standing questions on air-sea transfer of gases of low diffusivity. Sharp-crested wavelets...
Identification of Critical Load Distributions for Wind Loading
For practical application as well as for sophisticated investigations, the time dependent stochastic wind process has to be simplified in terms of input data to the calculation. Usually,...
Tension Leg Platform Response to Drag Forces by Equivalent Stochastic Quadratization
An equivalent stochastic 'quadratization' method is described for performing nonlinear stochastic response analyses of offshore platforms subject to wave and...
Largest and Characteristic Earthquakes in the U.S. East of the Rocky Mountains
A new statistical procedure is proposed for the estimation of maximum earthquake magnitude M in intraplate regions. Starting from a historical catalog of events and a seismotectonic classification...
A Comparison of Different Mathematical Models for the Spatial Correlation of Distributed Excitation Forces
This paper contains an investigation of the transverse vibrations of EULER-BERNOULLI beams under longitudinal tension and random space-time loading. Using GREEN's function...
Stochastic Propagation of Semi-Elliptical Surface Cracks
Random propagation of a semi-elliptical surface crack is investigated as a bivariate stochastic process. Under a few assumptions, a probability distribution of the surface crack propagation...
Distribution of Variance of Fatigue Lives of Ferrous Metals by the Analysis of Fatigue Strength Database
The purpose of this study is to determine the distribution characteristics of variance of fatigue lives of carbon and alloy steels, especially from the viewpoint of their dependence on...
Return to search