Cone Penetrometer Use on Uranium Mill Tailings
Piezocone data were found to be very reliable in the identification of uranium tailings according to the traditional categories of sands, sand-slime mixtures, and slimes by the use of...

Trace Toxic Metals Emissions from Hazardous Waste Incinerators
A physical model is proposed in order to explain the vaporization of metals during metallic waste incineration and is based on work performed to investigate inorganic emissions from coal...

Thermophilic Anaerobic Biodegradation of Waste Components in Coal Gasification Quench Liquors

Future Hydrothermal Power of the United States
Public indignation toward nuclear-power expansion, and dwindling oil and gas reserves dictate the needs to look for alternative-power sources, such as coal and water. It is a prime time...

Behavior of Sediment-Laden Plumes on Steep Slopes
The near field behavior of dense, sediment-laden flows on steep slopes was investigated as part of a study of mine tailings disposal. A literature review indicated that field and laboratory...

An Annual Water Balance for a Surface Mining Overburden Waste Embankment
The embankment contained a volume of 257 thousand cubic yards and resulted from a phosphate surface mining operation in southeastern Idaho. The elevation of the embankment is about 7500...

Water Balance Approach to Prediction of Seepage from Mine Tailings Impoundments, Part I: General Water Balance Approach
The prediction of seepage from a tailings impoundment requires careful evaluation because the predictions can have significant economic impact upon designs, as well as permit stipulations...

Water Balance Approach to Prediction of Seepage From Mine Tailings Impoundments, Part II: Theoretical Aspects of Water Balance Approach to Seepage Modeling and Detailed Case History Results
Some of the most significant volumes and rates of interstitial tailings water discharge generally occurs during the initial portions of the primary consolidation process. During primary...

Some Aspects of Analysis and Prediction of Subsidence
A procedure based on the nonlinear finite element analysis was investigated for the prediction of subsidence caused by longwall mining. This paper presents a case study involving predictions...

Computer Modeling of Roof Support
The Bureau of Mines is using a full-scale geotechnical model of a 15-foot-wide (4. 6-m) coal mine entry in correlation with computer finite-element analysis at its Spokane Research Center...

Impoundment Design for Precious Metal Tailings
An engineering study and design of impoundments for the disposal of mill tailings in central Nevada is presented. Mill process waste is generated as flotation tailings and cyanide residue....

Lessons Learned from First Impulse Turbine Installation in the U.S. Mining Industry
The paper discusses a research study to recover energy from service or cooling water brought into deep mines. The test site was the Luck Friday Mine, owned and operated by the Hecla Mining...

Flood Routing Through Rock Dumps in Natural Channels
The paper deals with flow through rockfill to analyze the problem of flood routing through large masses of waste rock from mining operations dumped in natural channels. Rock dumps in ephemerous...

Coal Ash Disposal and Water Quality: A Case Study

Waste Disposal and Groundwater Protection for Coal-Fired Power Plants

Ground-Water Drainage to Surface Mines Refined
Changes in seepage flux and hydraulic head (ground-water level) resulting from ground-water drainage into the first and subsequent cuts of a surface coal mine can be estimated by a technique...

Solid Waste Aspects of Utility Coal Reconversions

Nature of Pollutants in Oil Shale and Coal Conversion Wastewaters

Management of Inactive Uranium Mill Tailings

Remedial Action at the Salt Lake City Uranium Mill Tailings Site

 

 

 

 

Return to search